New C4 toy
 

I know this is not really C4 tech but I thought I would show it to you anyhow. I am completing my latest C4 drag car, that i expect to run low 8 high 7's in the 1/4 at around 165 MPH. It is powered by a Fuel injected 516 CID BBC.

Not all will like it but it will work fine for me.


https://cimg8.ibsrv.net/gimg/www.cor...1ba0de1498.jpg

https://cimg0.ibsrv.net/gimg/www.cor...e8cbb8439d.jpg

https://cimg1.ibsrv.net/gimg/www.cor...d6d80f3bc4.jpg

https://cimg3.ibsrv.net/gimg/www.cor...36cb2af329.jpg

https://cimg4.ibsrv.net/gimg/www.cor...5383739557.jpg

Good luck, really looks great. Post a video when you run it..

Nice! Can I catch a ride? :thumbs:

I want one. And yes it is most certainly C4 related, IMO.

What HP/TQ numbers from that fuel injected BBC?

To tell you the truth the power numbers are TBD. I am expecting around 850 HP and high 700 for torque but I have not dynoed it yet. I may not dyno this one and instead wait for my larger engine to dyno it.

I am going to build a 582 BBC with 12 degree Profiler heads for the final engine for the car. The 516 is a holdover until the 582 is done. I am updating the 516 with AFR heads from Jim (On the forum).

Looks great, I like it😀

subbed!!

Is that a Dana 36 or 44?

YEEECH! That's the ugliest c4 I've ever seen lol.Now if it was mine it would be the most awesome, beautiful c4 ever.:rock:

That is pretty, but come on.....get her shirt off and lets see what's up front.

The car is has a 9 inch, the rear end on the floor is a Dana 46 3.07 ratio.

That's nice. Is the wheelbase extended?

:cheers:
Steve

Good eye, 10 inches.

..... I like it ! ... C4 Pro-Mod ... What does that rocket weigh ? ... :thumbs: .....

2200 without me, 2400 driver.

..... I want your "garage" .....

Thanks

I can not show you under the hood because it is not done yet. The pictures I have attached are when I bought the car. I have made quite a few changes to the car to set it up how I want the car. Under the hood is one area that is being updated from a Dart headed 516 with a 1050 carb to a AFR headed 516 with fuel injection.

These pictures are from the engine as purchased and then with the heads pulled. I took the engine apart to make sure there were no issues. All was fine.


https://cimg9.ibsrv.net/gimg/www.cor...8565ea4f99.jpg

Current condition of engine, waiting for heads.

https://cimg5.ibsrv.net/gimg/www.cor...e782164007.jpg

As purchased.

Once the car is all done and made a few passes I will update the post.

Way Cool! :D:D:thumbs:

Yes, very cool. I love pro-stock hood scoops.