WTB Cammed C6Z
 

Delete - I found a car.

I’m located not far north of you in York, Pa.

2006 Corvette Z06
Victory red exterior/Black interior
2LZ-heated seats, navigation, power driver seat
68k Miles

Upgrades with almost all Receipts/documentation/dyno graphs: over $30k in Receipts for upgrades

Custom dyno tuned 604rwhp
Performance ET 1/4mi 10.1@140mph with video
LS7 Cylinder heads, Port/Polish, milled, CNC, bronze valve guides, dual valve spring kit, Manley Valves
Trunion upgraded roller rockers
Katech timing chain
Hardened push rods
Custom ground cam
ATI Super Damper Balancer
MSD Atomic air Intake Manifold-MAMO Ported and shaved
Nick Williams Black anodized 102 throttle body
Vararam 2 cold air intake
Meziere Electric Waterpump
Elite engineering catch can
160 t-stat

ARH headers 1 7/8
ARH off-road X-pipe
Muffler modded stock cat back
Mild to wild switch

Lingenfelter ZR1 Twin disc clutch
Tick Adjustable clutch master cylinder
Clutch pedal stop -billet
Remote clutch bleeder
LG carbon fiber prop shaft-new torque tube assembly
T56 Transmission completely upgraded forks, pads, sliders, syncros, etc- less than 10k miles on upgrades
RSD Snap shifter assembly
New C5Z06 axles

Lingenfelter Billet Rear drop spindles
Modified lower control arms
(fits 15in Wheels in the rear)
To fit 15in Wheels the rear brakes are currently c5z06 rear brake calipers Milled and powder coated red with new rear rotors
Bilstein Shocks on all 4 Corners

Black oem headlights
Suede red stitched shifter boot, red stitched ebrake boot, red stitched suede steering wheel with steering controls (not hooked up)
Pioneer I-Touch radio/navigation-works just like an iPhone and uses your apps!!
2010 carbon fiber OEM center console assembly

Gloss Black OEM 2017 Cup Wheels Grandsport/Z06 GM 19inch/20inch Cup Wheels wrapped in OEM Michelin run flat tires with new TPMS sensors
Tread depth front 7/32,
Tread depth rear 5-6/32

All 4 OEM C6Z06 brake calipers re-powder coated red with Black Lettering and new pads/rotors

Stock parts included:
Stock rear oem C6Z06 brake calipers/pads
Stock LS7 intake
Stock T56 trans parts that were upgraded
Stock Exhaust manifolds
Stock catalytic converters
Stock hpipe
Stock air intake
Stock cam, springs, push rods, timing chain
Stock radio/navigation head unit
Stock rear spindles
Stock torque tube

All work performed/installed by Tune time in NJ and Krazy House in NJ.
No accident history or signs of paint work. Clean Autocheck report

Price: $33,000

Optional:
Forgestar drag pack Wheels tires 17/15s $1700
Stock OEM C6Z06 competition grey Z06 Wheels with tires and TPMS



https://cimg3.ibsrv.net/gimg/www.cor...0c42745c1.jpeg

https://cimg2.ibsrv.net/gimg/www.cor...6050671b2.jpeg

https://cimg4.ibsrv.net/gimg/www.cor...961da04ce.jpeg

https://cimg5.ibsrv.net/gimg/www.cor...2d587492c.jpeg

Unfortunately that is more of a drag car and has higher miles than I’m looking for but it definitely is the right car for someone. GLWS

Funny unrelated story but we met a Beaver Springs in 2009/2010. I was in college and was there with my bolt on C5 FRC so I doubt you’d remember me but I popped my drag cherry and ran my first 12 that day so I remember it pretty well, lol.

Here is my zo6

​​​​​​​https://www.corvetteforum.com/forums...l7-tr6060.html

^^ Thanks but my OP says I'm not looking for built motors.

TTT - still looking for a clean C6Z.

Car is red. 2007 Z06 with 34k miles.

PRC 285cc heads, bronze guides, aftermarket titanium intake/hollow-stem exhaust valves, dual springs.

BTR Stage 4 cam.

Kook's 2" headers and 3" off-road pipes.

Halltech MF108 cold air intake.

Brand new ZR1 wheels, gloss-black.

PCM of NC plugwires and covers.

Interior is in excellent condition and exterior is in good condition.

More info or pictures, feel free to text or call 205-300-5085.

$37.5K

Thanks but as I said in the OP, I'm not looking for a big cam car. Something like a torquer (either on a 110 or a 116) would be ideal.