C5 taillight louvers
How can I take the louvers off? Any ideas would be great! Thanks!
|
Most of them simply use the same screws as the tail lights. Remove the screws, throw the louvers away reinstall the tail lights.
|
Originally Posted by Phanni
(Post 1597383111)
Most of them simply use the same screws as the tail lights. Remove the screws, throw the louvers away reinstall the tail lights.
|
Originally Posted by grantv
(Post 1597383658)
Guess you're not a fan of louvers? :D
|
Originally Posted by ArmchairArchitect
(Post 1597383799)
One of the tackiest C5 owner trends EVER. And that's saying a lot.
|
Originally Posted by Phanni
(Post 1597383111)
Most of them simply use the same screws as the tail lights. Remove the screws, throw the louvers away reinstall the tail lights.
|
It's kind of a love/hate relationship with the louvres. I've been contemplating painting them a satin black. Might look good in contrast to the Millenium yellow. And If I don't like it I can always remove them.
|
Originally Posted by ArmchairArchitect
(Post 1597383799)
One of the tackiest C5 owner trends EVER. And that's saying a lot.
|
Originally Posted by ArmchairArchitect
(Post 1597383799)
One of the tackiest C5 owner trends EVER. And that's saying a lot.
|
Originally Posted by o2bnkc
(Post 1597396558)
I don't know. I think the stick on fake brake ducts are the worst.
|
The worst
Big wings on the back.
|
Originally Posted by Phanni
(Post 1597383111)
Most of them simply use the same screws as the tail lights. Remove the screws, throw the louvers away reinstall the tail lights.
|
Originally Posted by runner140*
(Post 1597396122)
A little like BSM (body side molding). Hope I didn't p o anyone.
|
Originally Posted by Phanni
(Post 1597383111)
Most of them simply use the same screws as the tail lights. Remove the screws, throw the louvers away reinstall the tail lights.
:leaving: |
Remember to go green, and re-purpose them.
Cheese graters! :D |
Originally Posted by Jeff T.
(Post 1597399222)
C'mon, I really liked the bsm's! All I had to read was one post where the car had been painted and the color was way off... That was enough for me to leave mine alone!! :rofl:
|
Some are held on with the two screws- some are just adhesive and will loosen up with a hot hair dryer..... you can use Goo-gone or WD40 to clean off the remaining adhesive.
|
I believe the originals offered by GM screwed on, and some of the aftermarket were glued on.
One thing I have noticed about these louvers(my car has them) is, people who don't own a Corvette, like them. I get compliments all the time about the car, and the louvers. It's just Vette owners(and not all) that don't like them. Bob. |
I would have never bought them myself but since they came with the car I left them on. Some have complimented me on the looks, I'm still on the fence. It also has the matching license plate frame!https://cimg4.ibsrv.net/gimg/www.cor...922ab33236.jpg
|
Whatever works for you, it's your car. Me? I don't shop at Pep Boys...
:leaving: |
All times are GMT -4. The time now is 04:14 AM. |
© 2024 MH Sub I, LLC dba Internet Brands