I have lost my mind!!
As some of you know, I've been a hardcore NA guy forever. While I lurk, and occasionally post in this section, getting the most from an all motor setup is what I find fun and challenging... The last time I ran the car, we made a video.
That said, I have sold almost all of my NA LS7 stuff. Bought an iron 6.0 block and a Forced Inductions T4-76mm turbo. (class rules) Planning on 370ci Gonna fill it to the water holes with Hard Block. Forged rotating assembly 11:1 compression on E98 ARP Head/Main studs Air 2 Water intercooler BTR springs and likely get him to grind me a cam too. It'll have a Pro-Flo intake. Current plan is to use the 317 heads that came with the 6.0 to see how far I can go, before switching out to some Tooley worked TFS220s The car is in the chassis shop right now getting a 25.5 cage. Once out, it'll go to paint. I removed the hatch and installed a hardtop. Flared rear quarters. I'm really hoping to have it together by LSFest. It'll be tight, but my fingers are crossed. I'll start adding pics as the work progresses... |
Subscribed!
|
niiiice!
|
I was wondering when you were finally going to post this up . Looking forward to the build |
Start by removing the hatch and the upper part of the tub. https://cimg1.ibsrv.net/gimg/www.cor...fda6d0994.jpeg https://cimg8.ibsrv.net/gimg/www.cor...a1669d4dc.jpeg https://cimg7.ibsrv.net/gimg/www.cor...6aa32cf91.jpeg https://cimg2.ibsrv.net/gimg/www.cor...dabdf15f2.jpeg Strip out the engine bay and the interior. https://cimg3.ibsrv.net/gimg/www.cor...5366681ce.jpeg https://cimg3.ibsrv.net/gimg/www.cor...fde95ef25.jpeg Loaded on the trailer headed to the chassis shop. https://cimg4.ibsrv.net/gimg/www.cor...891c7f7ce.jpeg |
Doing a little mock up of stuff. https://cimg6.ibsrv.net/gimg/www.cor...cc82b70a0.jpeg https://cimg2.ibsrv.net/gimg/www.cor...7afde4d69.jpeg And the baby turbo... 76/87 1.10 A/R. Probably not the best T4-76 available, but a good starter for me. https://cimg8.ibsrv.net/gimg/www.cor...ae64ec31a.jpeg |
awesome, look at all the old burned up rubber in those wheel wells:rock:
|
lol. The rubber came off in sheets. |
Awesome. Welcome to the club. LOL. If your turbo sounds anything like mine, your going to absolutely love it. Mine has their ETR wheel. |
:thumbs: Subscribed! :cheers:
|
Awesome!!! |
Wow! Sub'd!
I haven't been on in a while, but definitely worth logging into here to follow. Selfishly observing for cage setup lol. You haven't lost your mind, just like doing dumb stuff with cars like the rest of us :thumbs: |
Your insane pete lol!! You have to much $$$🙂
|
This build is gonna be a cool one to follow |
You use to be a hardcore stick guy too. :leaving:
|
Yes, Gary, I know... :D |
And, thanks guys! It’s going to be a fun project and I’ll try to keep this thread updated. |
Originally Posted by DRIVER456
(Post 1597490138)
Your insane pete lol!! You have to much $$$🙂
|
Everything is good Pete! Good luck with the new build,hope i get to see it run👍
|
Originally Posted by Capthuff
(Post 1597502090)
Yes, Gary, I know... :D I think you may be smarter than some of us. :yesnod: |
All times are GMT -4. The time now is 12:14 AM. |
© 2024 MH Sub I, LLC dba Internet Brands