|
Where to get wide flares?
I’ve always avoided C2’s with flares, particularly the cutout look that I think cuts right into the beltline and doesn’t look right (imho). That said, the bulging flares are really growing on me and I’m considering selling a couple of cars and finding a project C2 that is already past the restoration possibility and building a widebody. Here are the current two that I really like, so my question is does anyone know the source for these bulging fender flares? https://cimg7.ibsrv.net/gimg/www.cor...5ab6af401.jpeg I don’t know who owns this one, but I love the overall look. https://cimg2.ibsrv.net/gimg/www.cor...a2de1fda1.jpeg Brian Hobaugh’s badass ‘65 race car. |
Don't know where you can source the flares, but both of those are definitely great looking cars.
I've always thought the look of these type of flares were incredible. Looking forward to following your project when you get one. Pat |
https://cimg4.ibsrv.net/gimg/www.cor...be858e7d9b.png
Don't know where to get them just thought I would share |
Thanks, Pat, I check in on your build thread every time I see an update. It’s really well done! I was just looking at eBay and it occurred to me that it might be more economical to buy one of the cutout flared cars and replace those flares with the bulging ones. There are several in the low 30’s that seem overall complete. I’m going to get my two ready for sale while I look and target early next year. Stay tuned! |
Originally Posted by reno stallion
(Post 1598345418)
https://cimg4.ibsrv.net/gimg/www.cor...be858e7d9b.png
Don't know where to get them just thought I would share |
https://cimg3.ibsrv.net/gimg/www.cor...f53adcf712.jpg
My 66 race car in 1986. Flairs were called Thumpers I believe. Might do a search on CF for that word. If I remember correctly there were discussions before about purchasing these flairs but with little luck if they were still being made. |
|
CORVETTE PACIFICA shows they have a couple variations.
https://www.corvettepacifica.com/cat...fenders//reset This is a thread with more pictures and discussion: https://www.corvetteforum.com/forums...re-help-2.html |
https://cimg3.ibsrv.net/gimg/www.cor...24db54a27.jpeg jfreema12@yahoo.com he calls them Road Race Flares. He also has wide quarters. |
Saddletan, this is awesome! I spoke to Jeff and he’s making my flares as I write this and I should have them soon. It’s extra awesome as they are exactly the style I was looking for. Here’s what I mean: https://cimg8.ibsrv.net/gimg/www.cor...0ed5b4c8a.jpeg This is the coupe I bought. Notice the classic mid-year belt line that passes unbroken just above the rear wheel. I think this is one of the most distinctive and beautiful parts of the body style. https://cimg4.ibsrv.net/gimg/www.cor...2d236ce6b.jpeg I found this picture of a ‘64 coupe and what I thing is the biggest issue that turns people off to flares. This flare corrupts the whole belt line and design of the car. In my opinion, it is horrible (I apologize if this car belongs to a forum brother, it’s just my opinion!) and looks tacked on with no regard for the beautiful lines of the design. https://cimg5.ibsrv.net/gimg/www.cor...ba14de4f6.jpeg Brian’s design is far superior. Notice how it complements the belt line. While there is a slight lift just behind the rear wheel (I will address this on my build), the overall shape of the flare is significantly better and that is what I was looking for in my search. https://cimg3.ibsrv.net/gimg/www.cor...a6c42e450.jpeg Here is the flare Jeff builds. Yes, it is an extreme “bubble” style flare, but it respects the belt line and in my opinion is how it would have been designed if GM designed it. Of course if you install a flare like this one, you need to lower the car and inch or two and then reduce the diameter of the tire which are all in the plan (currently planned 315/30-18 is 25.5”) I will finish the flares in my garage and need to make some slight modifications to the bottom edges to better blend into the body and then hope to be able to have a local painter blend the paint. More to come! |
so hurt you are dissing the Black car...... Sob, sniffle.....
|
Lol, buck up bucko your car is a real badass! |
8^)
|
Originally Posted by Factoid
(Post 1598433183)
Saddletan, this is awesome! I spoke to Jeff and he’s making my flares as I write this and I should have them soon. It’s extra awesome as they are exactly the style I was looking for. Here’s what I mean: https://cimg8.ibsrv.net/gimg/www.cor...0ed5b4c8a.jpeg This is the coupe I bought. Notice the classic mid-year belt line that passes unbroken just above the rear wheel. I think this is one of the most distinctive and beautiful parts of the body style. https://cimg4.ibsrv.net/gimg/www.cor...2d236ce6b.jpeg I found this picture of a ‘64 coupe and what I thing is the biggest issue that turns people off to flares. This flare corrupts the whole belt line and design of the car. In my opinion, it is horrible (I apologize if this car belongs to a forum brother, it’s just my opinion!) and looks tacked on with no regard for the beautiful lines of the design. https://cimg5.ibsrv.net/gimg/www.cor...ba14de4f6.jpeg Brian’s design is far superior. Notice how it complements the belt line. While there is a slight lift just behind the rear wheel (I will address this on my build), the overall shape of the flare is significantly better and that is what I was looking for in my search. https://cimg3.ibsrv.net/gimg/www.cor...a6c42e450.jpeg Here is the flare Jeff builds. Yes, it is an extreme “bubble” style flare, but it respects the belt line and in my opinion is how it would have been designed if GM designed it. Of course if you install a flare like this one, you need to lower the car and inch or two and then reduce the diameter of the tire which are all in the plan (currently planned 315/30-18 is 25.5”) I will finish the flares in my garage and need to make some slight modifications to the bottom edges to better blend into the body and then hope to be able to have a local painter blend the paint. More to come! Looking directly into side of Car, you can't see the C2 center Body-line extend across any Bubble Flare, as it break's Center Line as soon as flare starts. I built to what I liked 1st try an what I liked better Belt-Line 2nd try wise at 2 1/2" flare. Looking directly into side of either car's Belt-Line, it looks almost stock on either one, but looking Front to Rear or Rear to Front the Belt-Line's change jumps out at you, although the 2nd try at it appears to be more like a stock C2's. Car below is not mine. Is the body's center belt-line Stock, or Flared, if Flared how much? https://cimg1.ibsrv.net/gimg/www.cor...bce9fb00f2.jpg My car flared 2 1/2" https://cimg4.ibsrv.net/gimg/www.cor...28d02427d8.jpg You build to what you "LIKE", you don't have to justify "Look" to anyone else but yourself. So build it to "Justify" "Look" you want. No one else's opinion matters, except for you Wife's...LOL BUBBLED FLARES WILL GET CAR A LOT OF ATTENTION, ESPECIALLY FROM THE YOUNGER CROWD!!!! |
Originally Posted by Factoid
(Post 1598433183)
Saddletan, this is awesome! I spoke to Jeff and he’s making my flares as I write this and I should have them soon. It’s extra awesome as they are exactly the style I was looking for. Here’s what I mean: https://cimg8.ibsrv.net/gimg/www.cor...0ed5b4c8a.jpeg This is the coupe I bought. Notice the classic mid-year belt line that passes unbroken just above the rear wheel. I think this is one of the most distinctive and beautiful parts of the body style. https://cimg4.ibsrv.net/gimg/www.cor...2d236ce6b.jpeg I found this picture of a ‘64 coupe and what I thing is the biggest issue that turns people off to flares. This flare corrupts the whole belt line and design of the car. In my opinion, it is horrible (I apologize if this car belongs to a forum brother, it’s just my opinion!) and looks tacked on with no regard for the beautiful lines of the design. https://cimg5.ibsrv.net/gimg/www.cor...ba14de4f6.jpeg Brian’s design is far superior. Notice how it complements the belt line. While there is a slight lift just behind the rear wheel (I will address this on my build), the overall shape of the flare is significantly better and that is what I was looking for in my search. https://cimg3.ibsrv.net/gimg/www.cor...a6c42e450.jpeg Here is the flare Jeff builds. Yes, it is an extreme “bubble” style flare, but it respects the belt line and in my opinion is how it would have been designed if GM designed it. Of course if you install a flare like this one, you need to lower the car and inch or two and then reduce the diameter of the tire which are all in the plan (currently planned 315/30-18 is 25.5”) I will finish the flares in my garage and need to make some slight modifications to the bottom edges to better blend into the body and then hope to be able to have a local painter blend the paint. More to come! |
I certainly agree with the no need to justify AND only the wife’s perspective really matters! I believe the purpose of a forum is to share perspective and information. Sometimes you ask for help or input and sometimes you simply share your thoughts and projects. Both approaches are valuable. I hate Facebook for a whole variety of reasons, but mainly due to the ugliness, fake news, and divisiveness that it spawns. A moderated forum is far more effective as like minded individuals can share often very diverse perspectives effectively and people join due to their love of these iconic vehicles, not simply because they are related, went to high school together or are neighbors - fences make great neighbors! Poorhouse, I love your car and how you approached the need for more tire and to your point, it is hard to tell how much flare is there. However, for my tastes they are not aggressive and in your face enough. I want the old school, road race look where there is no doubt about the flare or the intent and I’m not really concerned what others think, I just hope they respect the intent and perhaps add some tidbit of info to their arsenal of experience. |
Originally Posted by RJ1
(Post 1598435488)
IMHO be sure you have a rear tire with the height to fill the new wheel opening. The white car with flair and the red car both look bad because tire is short leaving big gaps all around the tire.
|
I like the widened look, front and rear, & I like it to follow the factory styling. Reno Stallion is a great execution. I also think an extension to the front with a splitter would look good as well. The gen 1 camaro air dam that many people add to their C2 just doesn't do the car justice.
|
Originally Posted by Factoid
(Post 1598433183)
Saddletan, this is awesome! I spoke to Jeff and he’s making my flares as I write this and I should have them soon. It’s extra awesome as they are exactly the style I was looking for. Here’s what I mean: https://cimg8.ibsrv.net/gimg/www.cor...0ed5b4c8a.jpeg This is the coupe I bought. Notice the classic mid-year belt line that passes unbroken just above the rear wheel. I think this is one of the most distinctive and beautiful parts of the body style. https://cimg4.ibsrv.net/gimg/www.cor...2d236ce6b.jpeg I found this picture of a ‘64 coupe and what I thing is the biggest issue that turns people off to flares. This flare corrupts the whole belt line and design of the car. In my opinion, it is horrible (I apologize if this car belongs to a forum brother, it’s just my opinion!) and looks tacked on with no regard for the beautiful lines of the design. https://cimg5.ibsrv.net/gimg/www.cor...ba14de4f6.jpeg Brian’s design is far superior. Notice how it complements the belt line. While there is a slight lift just behind the rear wheel (I will address this on my build), the overall shape of the flare is significantly better and that is what I was looking for in my search. https://cimg3.ibsrv.net/gimg/www.cor...a6c42e450.jpeg Here is the flare Jeff builds. Yes, it is an extreme “bubble” style flare, but it respects the belt line and in my opinion is how it would have been designed if GM designed it. Of course if you install a flare like this one, you need to lower the car and inch or two and then reduce the diameter of the tire which are all in the plan (currently planned 315/30-18 is 25.5”) I will finish the flares in my garage and need to make some slight modifications to the bottom edges to better blend into the body and then hope to be able to have a local painter blend the paint. More to come! Doing that for me makes bubble flares look better than rounded wheel that follows the tires shape, but from a racing stand point round wheel-well makes it quicker and easier to change tires. As for as using 26" tall tires, it's the rear wheel-well more so than fronts, that 26" tires look to small sitting in opening made for 27 3/4" dia tires at least for me. Once you get the new Flares and tires mounted, you might try mocking up rear wheel-well opening using cardboard like that of a 24 can pack of Coke's to see if just adding 1.00" to front side of opening might help mitigate look smaller 26" vs 27 3/4" dia tires that came stock look better. Could look at changing rear's shape too, if necessary. Some times what I see with in my mind's eye, doesn't always work for me when we mocked it up... Just a thought. |
Originally Posted by Poorhousenext
(Post 1598436503)
To me, an I believe to you, it's the wheel-well opening look on Brian's car that complements the original wheel-well's stock look more so than C2 original Belt-Line, but from looking at rear flares you are buying, they drop the wheel-well opening down below the center belt-line, more like the look of stock wheel-well.
Doing that for me makes bubble flares look better than rounded wheel that follows the tires shape, but from a racing stand point round wheel-well makes it quicker and easier to change tires. As for as using 26" tall tires, it's the rear wheel-well more so than fronts, that 26" tires look to small sitting in opening made for 27 3/4" dia tires at least for me. Once you get the new Flares and tires mounted, you might try mocking up rear wheel-well opening using cardboard like that of a 24 can pack of Coke's to see if just adding 1.00" to front side of opening might help mitigate look smaller 26" vs 27 3/4" dia tires that came stock look better. Could look at changing rear's shape too, if necessary. Some times what I see with in my mind's eye, doesn't always work for me when we mocked it up... Just a thought. |
| All times are GMT -4. The time now is 05:11 PM. |
© 2024 MH Sub I, LLC dba Internet Brands