Big Block CAM and Lifters
 

I decided to go with a MUCH more expensive roller cam so I no longer need these.
Crane Hydraulic Flat Tappet Camshaft for Chevy Big Block 134561 (Summit $136)
Crane Anti-Pump Up Hydraulic Lifters 99277-16 (Summit $83)
Still in boxes.
$125 for both OBO plus shipping.

$100 plus shipping....

ttt

I was looking to upgrade the cam and lifters in my 1986 454. Would this one your selling be too much for street usage ? some local, some highway.

Nope. Should be fine. The other one I got is more aggressive. This is the exact one I had in my engine before I decided to go roller.

Here is my Vette with this cam.

Cool.
Next question, would this cam work fine with stock heads and valves ?

It should be fine. I am running stock 336781 heads. Plain old factory BB iron heads.

ttt

Still have these. $100 plus shipping.....

bump

Just curious - listened to your video - sounds great ! Can the cam and lifters be used with factory push rods? Are the parts new - if not how many miles on them?

thanks,

Tugboat53

As for the push rods... I don't know the answer to that. The cam and lifters are new, in the box, never used. I bought them as a replacement for the exact one in the engine because I was rebuilding it. I changed my mind mid rebuild and did a roller cam retrofit. The cam has a .553/.571 lift. Do you know the length of the factory push rods? I still have the ones I removed. I'll throw them in free if you want. Don't know the mileage on them.

Please advise what shipping will be including the used pushrods to 30813 zip and what payment you will accept.

thanks,

Tugboat53

PM sent!

Still available!!!