2019 ZR1 Carbon Fiber halo installation
Alright everyone, I posted a video to show the installation of the carbon fiber halo on the 2019 ZR1.
Hope you all enjoy!! |
Thanks for posting, but I wish he had shown before/after with the roof back on. Any pics of this?
|
|
Which vendor did you get this from? Is it the lighting or does the carbon fiber halo piece (color) not exactly match up with the top?
|
The ZR1 targa has an orangeish tint to it in the carbon fiber twill. Same with the supercharger air cover under hood.
mine is same color https://cimg8.ibsrv.net/gimg/www.cor...837fae7dbf.jpg https://cimg3.ibsrv.net/gimg/www.cor...dfb016ce93.jpg https://cimg1.ibsrv.net/gimg/www.cor...6023231d69.jpg |
The reason the GM exterior CF panels don't match the aftermarket ones is that GM is using an anti-HEV tint to protect the resin against the inevitable damage cause by light exposure.That the aftermarket pieces do not share this tint means that they are not protecting against HEV, and their resins will fail sooner than if they had protection. In the mean time they will not cosmetically match the OEM CF. Personally I suspect that re-clearing them with the right tinted clear would not be a very difficult process for an aftermarket manufacturer to figure out. I know I could, if I had the time and facilities.
|
Well done...the Carbon Fiber halo fits in perfectly with the rest of the ZR1.
|
Nicely done install video. Personally, I prefer the stock look however. |
Where did you get this from? |
An individual seller on ebay. They don’t have them anymore... |
Thanks for posting the installation video. I bought one of these in 2015 for my Z06 but never got around to installing it. I will definitely install it on my ZR one when it arrives. Great job. Looks great Doc |
Doesn't quite match |
Originally Posted by WzUpDoc
(Post 1598834162)
Thanks for posting the installation video. I bought one of these in 2015 for my Z06 but never got around to installing it. I will definitely install it on my ZR one when it arrives. Great job. Looks great Doc |
Originally Posted by AD2386
(Post 1598833097)
Where did you get this from? I think I saw where Apsis USA carries these. |
You have got to stop posting these videos. Every time you do I end up spending more $$!!!!:rofl:
My A pillars from your last video should be here this week. Good job! |
Originally Posted by txoutdoors
(Post 1598835438)
You have got to stop posting these videos. Every time you do I end up spending more $$!!!!:rofl:
My A pillars from your last video should be here this week. Good job! |
Is that vinyl on the fuel filler door? Do you have a source for the ZR1 sticker on the fuel filler door? The rest of the black out to the roof line at the top and rear hatch opening is that also vinyl? |
Originally Posted by WzUpDoc
(Post 1598836304)
Is that vinyl on the fuel filler door? Do you have a source for the ZR1 sticker on the fuel filler door? https://cimg4.ibsrv.net/gimg/www.cor...851cf31b4e.jpg https://cimg7.ibsrv.net/gimg/www.cor...1c8b8ea12c.jpg https://cimg3.ibsrv.net/gimg/www.cor...8dde1c179d.jpg https://cimg0.ibsrv.net/gimg/www.cor...6d2d52bac1.jpg I also make the sun visor warning label covers too. Let me know what ya need I'll send you to my website. I make Corvette Jerseys as well Themed-jerz.com |
And for everyone wanting to know what the sun visors look like, here they are on the Sebring orange ZR1.
https://cimg1.ibsrv.net/gimg/www.cor...62d0d573b0.jpg https://cimg9.ibsrv.net/gimg/www.cor...2396ebcab7.jpg https://cimg6.ibsrv.net/gimg/www.cor...5237bd4c74.jpg |
Halo and sun visor covers ordered. :willy:
|
All times are GMT -4. The time now is 08:16 PM. |
© 2024 MH Sub I, LLC dba Internet Brands