CorvetteForum - Chevrolet Corvette Forum Discussion

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)
-   C7 General Discussion (https://www.corvetteforum.com/forums/c7-general-discussion-142/)
-   -   Center Console Lid Issue - Will GM Replace? (https://www.corvetteforum.com/forums/c7-general-discussion/4251919-center-console-lid-issue-will-gm-replace.html)

I got your ZO6 03-14-2019 08:46 PM

Center Console Lid Issue - Will GM Replace?
 
I know there have been threads on this in the past but my questions is has there been a service bulletin on this and will they replace it if you are past the 3yr/36k bumper to bumper warranty if it does occur?

Dcasole 03-14-2019 10:13 PM

I was out of 3 year 36 and the service manager ok'ed a goodwill replacement ....

Dave

GARYFINN 03-14-2019 10:15 PM

What issue ???

Vetteman Jack 03-14-2019 10:19 PM

Probably depends on the dealer - if you are out of the 3/36 warranty, they do not have to replace the console lid. But as above, maybe they would do a goodwill replacement for you. Worth a shot. Not like it is an unknown problem with the part.

Dcasole 03-14-2019 10:31 PM


Originally Posted by GARYFINN (Post 1599047336)
What issue ???

Leather let's loose , and stretches, looks like crap ...

My new one , replaced a few months back is holding up well

Dave

hummiscorvettetaken 03-14-2019 11:19 PM

1 Attachment(s)

Originally Posted by GARYFINN (Post 1599047336)
What issue ???

This issue!

shakinrock 03-15-2019 07:25 AM

So I wonder if one could apply hot air to shrink it? Might sound dumb but might work. I do not want to be the alpha test site though. :)

Probably hotter than a standard blow dryer but a lot cooler than a heat gun.

Dcasole 03-15-2019 08:19 AM


Originally Posted by shakinrock (Post 1599048305)
So I wonder if one could apply hot air to shrink it? Might sound dumb but might work. I do not want to be the alpha test site though. :)

Probably hotter than a standard blow dryer but a lot cooler than a heat gun.

The problem is the glue that is underneath has let loose , that is what is causing the wrinkles , even if u could shrink it which I dont think you can as its not that type of material it will still come back

Some have taken the lid to an upholstery shop where they peal the cover back and reglue it back down , I am sure it's not that expensive to do

Dave

cbowlan 03-15-2019 11:58 AM

If you know of any threads that have a guide to where to find the part and how to replace it, a link would be fantastic.

Dcasole 03-15-2019 12:37 PM


Originally Posted by cbowlan (Post 1599049724)
If you know of any threads that have a guide to where to find the part and how to replace it, a link would be fantastic.

The best place to buy a new lid is CULTRAG Performance , they are a vendor here or u can do a google search

They are advertising it on Ebay in many colors, in red its $179.99 and free shipping

Might be cheaper on their website

Best price and they ship fast . As far as installation it's only 3 torx head screws ....

Dave

cbowlan 03-15-2019 12:50 PM


Originally Posted by Dcasole (Post 1599049996)
The best place to buy a new kid is CULTRAG Performance , they are a vendor here or u can do a google search

They are advertising it on Ebay in many colors, in red its $179.99 and free shipping

Might be cheaper on their website

Best price and they ship fast . As far as installation it's only 3 torx head screws ....

Dave


https://www.cultragfactoryparts.com/...p=console&pg=1

They run around $250 but the selection is slim to match the interior of the car. I have red interior and the only option for that they have is the Z06 cover... I have a Z51 so I'm not going to falsely badge my car.

However, you can definitely find a lot of options on eBay.

KenHorse 03-15-2019 12:56 PM

https://cimg6.ibsrv.net/gimg/www.cor...77f37cfe4c.jpg
Instead of replacing, this is one option

I got your ZO6 03-15-2019 01:41 PM


Originally Posted by Dcasole (Post 1599047327)
I was out of 3 year 36 and the service manager ok'ed a goodwill replacement ....

Dave

Seems like this is such a common problem they should actually recall this.

GARYFINN 03-15-2019 02:25 PM


Originally Posted by hummiscorvettetaken (Post 1599047650)
This issue!

That blows !!!

REPOED C7 03-15-2019 02:59 PM

I had a very minor elbow indention and the dealership replaced mine under warranty with no questions asked.

cbowlan 03-15-2019 03:05 PM


Originally Posted by REPOED C7 (Post 1599050894)
I had a very minor elbow indention and the dealership replaced mine under warranty with no questions asked.

I'm pretty far out of warranty... Like 2 years... I don't think they would do that for me.

Dcasole 03-15-2019 03:30 PM


Originally Posted by cbowlan (Post 1599050072)
https://www.cultragfactoryparts.com/...p=console&pg=1

They run around $250 but the selection is slim to match the interior of the car. I have red interior and the only option for that they have is the Z06 cover... I have a Z51 so I'm not going to falsely badge my car.

However, you can definitely find a lot of options on eBay.

You are not looking at the right place , here is the red non badged Console lid that they sell for 179.00

https://www.ebay.com/itm/2014-2019-C...0AAOSwBahU~LkU

It might be better just to call then , Patrick is great to deal with
Dave

silver955i 10-06-2022 10:23 AM

https://www.redlinegoods.com/C7shift...AaAotYEALw_wcB

carllangford 10-06-2022 12:37 PM


Originally Posted by silver955i (Post 1605758647)

Do we have any success stories with this one? That's a little work to get that in.


All times are GMT -4. The time now is 05:31 PM.


© 2024 MH Sub I, LLC dba Internet Brands