CorvetteForum - Chevrolet Corvette Forum Discussion

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)
-   Canadian Events (https://www.corvetteforum.com/forums/canadian-events-97/)
-   -   Looking for tuner (https://www.corvetteforum.com/forums/canadian-events/4264005-looking-for-tuner.html)

crazybird 04-16-2019 07:34 PM

Looking for tuner
 
Can anyone recommend a good tuner in the Brantford/Cambridge area?

RedZ4me 04-16-2019 08:37 PM

Dave - owner of Race Ready Garage and in Cambridge too. He's good

crazybird 04-16-2019 08:53 PM

Thx, I’ll call him!

red454 04-21-2019 11:44 AM

Arun at CCperf did my tune and I was very happy with the results. Very easy guy to work with.

crazybird 05-17-2019 01:30 PM

1 Attachment(s)
Shout out to the guys at Race Ready in Cambridge. Thanks again!

Cman01 05-18-2019 08:09 AM

So what exactly did they do for you AFA the tune is concerned? Did you have an issue with a previous tune on the car?

I'm going to see them next week for a different tune than what I'm running now on my HCI Z06, I'm looking for better driveability and hopefully pick up a few extra ponies.

They were recommended to me by another CF member here that had HCI work done there on his Z06, and I've spoken to Dave and visited his shop a few times so hopefully I'm going to get the results I'm looking for.

Tony

crazybird 05-27-2019 11:28 AM

Sorry for the late reply.
I had put on a full exhaust(B&B) and K&N intake. My car was stock up until that so I wanted to see what difference the mods had made and be sure the engine was doing what it needed. End result is 350 up to 405hp on the dyno and they tweaked a few things that needed tweaking.

dankhts 05-27-2019 06:39 PM

whaaaaat ? You have 405 hp with just an exhaust and a tune?? Am I missing something ?

YBNORMEL 05-27-2019 07:45 PM

I've had probably 5 different people tune my car, even taking the car to Louisiana for Alan Futral to put in a cam and then tune. Arun has to be the most competent of any that I've dealt with.

crazybird 05-27-2019 11:51 PM


Originally Posted by dankhts (Post 1599475748)
whaaaaat ? You have 405 hp with just an exhaust and a tune?? Am I missing something ?

Yes sir, headers-high flow cats-x pipe-mufflers and the K&N cai. They printed off the sheets from the dyno pulls for me as well. Great guys to deal with and really cool to be able to watch and video the pulls.


All times are GMT -4. The time now is 02:04 PM.


© 2024 MH Sub I, LLC dba Internet Brands