Looking for tuner
#2
Le Mans Master
Dave - owner of Race Ready Garage and in Cambridge too. He's good
Last edited by RedZ4me; 04-16-2019 at 08:37 PM.
The following 2 users liked this post by red454:
JUSTAKAR (05-15-2019),
LedfootLarry (05-19-2019)
#6
Melting Slicks
So what exactly did they do for you AFA the tune is concerned? Did you have an issue with a previous tune on the car?
I'm going to see them next week for a different tune than what I'm running now on my HCI Z06, I'm looking for better driveability and hopefully pick up a few extra ponies.
They were recommended to me by another CF member here that had HCI work done there on his Z06, and I've spoken to Dave and visited his shop a few times so hopefully I'm going to get the results I'm looking for.
Tony
I'm going to see them next week for a different tune than what I'm running now on my HCI Z06, I'm looking for better driveability and hopefully pick up a few extra ponies.
They were recommended to me by another CF member here that had HCI work done there on his Z06, and I've spoken to Dave and visited his shop a few times so hopefully I'm going to get the results I'm looking for.
Tony
#7
Sorry for the late reply.
I had put on a full exhaust(B&B) and K&N intake. My car was stock up until that so I wanted to see what difference the mods had made and be sure the engine was doing what it needed. End result is 350 up to 405hp on the dyno and they tweaked a few things that needed tweaking.
I had put on a full exhaust(B&B) and K&N intake. My car was stock up until that so I wanted to see what difference the mods had made and be sure the engine was doing what it needed. End result is 350 up to 405hp on the dyno and they tweaked a few things that needed tweaking.
#9
I've had probably 5 different people tune my car, even taking the car to Louisiana for Alan Futral to put in a cam and then tune. Arun has to be the most competent of any that I've dealt with.
The following users liked this post:
Pompitup (05-29-2019)
#10
Yes sir, headers-high flow cats-x pipe-mufflers and the K&N cai. They printed off the sheets from the dyno pulls for me as well. Great guys to deal with and really cool to be able to watch and video the pulls.