Cylinder head flowing in OC?
Hi all. I have a potted set of gen 2 lt4 heads that I’m curious to flow. Anyone have any suggestions on a shop to take them to and an idea of approx how much this will run?
|
American Heritage has a flow bench. They ported my stock LS1 heads as well as a set of 853's that I had them refresh.
https://www.americanheritageperformance.com/ https://cimg5.ibsrv.net/gimg/www.cor...5a3d2ac7b2.jpg |
any potentiallly closer suggestions? I'll drive out there if I have to but that's about 4 hours of driving considering I'll probably have to drop them off and then make a return trip to pick them up.
|
Bob McKray Performance in Mission Viejo
|
Awesome suggestion. Just spoke to him. He’s about a mile from my house. Thank you!!!!
|
Glad I could help; Bob ported a set of Z28 heads for me years ago and installed bigger values. Good quality work!
|
Flow Technology is in Garden Grove has been there since 1981. Juan Mendoza did the heads and intake manifold on my '64 including pocket porting, changing 1.94/1.50 to 2.02/1.60 valves, 3-angle valve job, and port/gasket matching. Juan has been written up in Car Craft Magazine and is infamous as he does the LA Street Racers crowd. That's a pretty strong recommendation.
|
Originally Posted by Obe1 GS
(Post 1599398451)
Glad I could help; Bob ported a set of Z28 heads for me years ago and installed bigger values. Good quality work!
|
Have 2 good guys in Santa Clarita too far for you though
Looking for someone with a bench near Hemet. Do all my own porting..maybe its time to build a bench. Not even a lousy machinist who can do a real valve job around here. |
All times are GMT -4. The time now is 11:07 AM. |
© 2024 MH Sub I, LLC dba Internet Brands