Modded Curt C11380 C6 trailer hitch + drawbar (can fit Z06 *DEPENDING ON EXHAUST*)
 

*** EDIT 8/2/19: hitch and drawbar are sold (to XLR8-R)

I used this Curt C11380 trailer hitch and C45571 2 5/8" riser drawbar w 1 7/8" ball on my 2013 Z06 to tow my wheels/tires + fuel jugs and tools to the track and back. It has been slightly modified in order to fit the Z06. I removed the axleback/muffler sections of my Corsa catback exhaust and replaced them with 3" straight tips when I towed. If there is at least 1 3/4" of space between the muffler cans on your exhaust, then this trailer hitch could work for you. If you have less than 1 3/4" spacing between the mufflers, then no, this hitch will not work with your exhaust.

Unfortunately I can't guarantee anything regarding fitment, but you can see how the center square tube needs room down the exact center of the car for this hitch to work.

I purchased these parts new, they have always been stored indoors since they were removed, and they are lightly used (1,000 miles or less).

$80 + shipping. Shipping will depend on where you are... I would expect it to be at least $40, maybe as high as $65. Shipping will be via FedEx Ground. I have lots of experience shipping car parts, and I have successfully packaged delicate and heavy items such as carbon fiber body parts to transmissions and cylinder heads (I've shipped at least a dozen sets of wheels too, all arriving without being damaged), so know that I will make sure your trailer hitch gets to you in good condition.

Gallery of pictures here (in case they're not showing up below): https://postimg.cc/gallery/ojgeqvp2/

Questions about how this hitch installs? Here's Curt's installation directions: https://assets.curtmfg.com/masterlib..._11380_INS.PDF

https://cimg0.ibsrv.net/gimg/www.cor...a98d484255.jpg

https://cimg6.ibsrv.net/gimg/www.cor...536eadaf91.jpg

https://cimg4.ibsrv.net/gimg/www.cor...a2538aa772.jpg

https://cimg3.ibsrv.net/gimg/www.cor...d14c239f1b.jpg

https://cimg5.ibsrv.net/gimg/www.cor...bdb663aa10.jpg

https://cimg7.ibsrv.net/gimg/www.cor...17b1463d81.jpg

https://cimg2.ibsrv.net/gimg/www.cor...64f03b2559.jpg

https://cimg6.ibsrv.net/gimg/www.cor...3fdd9c3225.jpg

https://cimg4.ibsrv.net/gimg/www.cor...e2ab64d253.jpg

https://cimg1.ibsrv.net/gimg/www.cor...03fa719dff.jpg

Sorry to jump off topic what wheels are those ?i need em

Nice option for someone
 

I got the same Curt hitch to work on my ZO6 with NPP tips. Someone should jump right on this as this is a great set up. I just wanted to add that the wiring for brakes and rear lights are very simply to do.

18" Forgestar CF5, deep concave, in textured black.

Hitch and drawbar are sold.