I'm kinda interested in what was the manufacturer of the front and rear suspension
|
I like it... will have to follow this thread
|
Originally Posted by gkull
(Post 1600452433)
I'm kinda interested in what was the manufacturer of the front and rear suspension
FRONT- https://www.detroitspeed.com/speedra...-sbc-ls-032072 https://www.detroitspeed.com/img/product/032072_1-Z.jpg REAR- https://www.detroitspeed.com/detroit...00hp-041742-sr https://www.detroitspeed.com/img/pro...742-SR_2-Z.jpg |
Detroit speed when cost is not a problem. It works well and will win.
|
Yes Detroit speed front and rear jri coil overs baer 6s brakes front & back ls7 & t56 it will be my first time doing the ls swap on anything.
|
Very cool looking headers.
|
:lurk:
|
Very nice! I’m glad to see side pipes. What are the motor specs?
|
Motor is an ls7 h/c/I I bought from a forum member from a c6 z06 estimate to be around 600 crank hp but do not know exact
|
open question, does that detroit speed decalink rear make it such that the diff is no longer a suspension member? and the half shafts are not the endlinks?
Or is the diff still an integral piece even with all that also, considering the front+rear cost is like 16 grand, why not go for one of those complete replacement frames for 17.5k? http://roadstershop.com/product/full...vette-chassis/ |
Yes the DSE rear makes the diff not part of the suspension and I got a pretty good deal on the suspension But I was also looking at going with an SR111 frame
|
Very nice build. However those screw holes temporarily holding the flared fenders in place will come back to haunt you.
|
Love the wheels and flares, very excited to see how this turns out
|
Thanks! And I will be glassing everything together and have filled the holes with panel bond so I hope I don’t have issues with it but we will see!
|
Originally Posted by Richard454
(Post 1600452535)
Detroit Speed- be sitting down when you see the price tag...just sayin...
|
update what are you guys running for hydraulic clutch master?
Made a little progress Hope to set the motor and trans over in the frame this week. Curious as to what setup everyone is using for hydraulic clutch?
https://cimg1.ibsrv.net/gimg/www.cor...88cf78a4a.jpeg https://cimg6.ibsrv.net/gimg/www.cor...3736849ac.jpeg https://cimg6.ibsrv.net/gimg/www.cor...855cfc212.jpeg https://cimg9.ibsrv.net/gimg/www.cor...1d12685cd.jpeg https://cimg2.ibsrv.net/gimg/www.cor...64900f540.jpeg https://cimg2.ibsrv.net/gimg/www.cor...4200fb580.jpeg https://cimg7.ibsrv.net/gimg/www.cor...e1d6ac901.jpeg |
Impressive build!
|
Whos header/side pipe is that? At that stage in my build ready for them..
|
Wow, very nice, top notch build. Will be following to see how this one turns out.
|
All times are GMT -4. The time now is 11:40 AM. |
© 2024 MH Sub I, LLC dba Internet Brands