CorvetteForum - Chevrolet Corvette Forum Discussion

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)
-   C3 Tech/Performance (https://www.corvetteforum.com/forums/c3-tech-performance-3/)
-   -   '72 Exhaust Suggestions (https://www.corvetteforum.com/forums/c3-tech-performance/670595-72-exhaust-suggestions.html)

Tom78 10-13-2003 06:28 PM

'72 Exhaust Suggestions
 
Hey all,

I am looking to upgrade the exhaust system on my '72. The previous owner had put on the stock style mufflers and its too quiet for my liking. I do already have Flowtech Block Hugger Headers but what would you suggest for the rest of the way back from the headers to produce a deep commanding tone? I want to get a deeper tone from the exhaust. Someone told me to look in to purchasing a set of glass pack mufflers, but I wanted to see what you all had to offer for suggestions.

What should I look into? Where can I find them? Any recommendations?

Thanks,
Tom


[Modified by Tom78, 6:29 PM 10/13/2003]

TNT 10-13-2003 09:06 PM

Re: '72 Exhaust Suggestions (Tom78)
 
Tom, the only advice I can give you is, stay away from chambered pipes. Some forum brothers like them and I respect there opinions! But they are just too loud and rob HP. Thad

DP77Vette 10-13-2003 09:14 PM

Re: '72 Exhaust Suggestions (TNT)
 
:D I like my chambered, Just added headers, don't seem too loud to me!! How do they rob HP??? :confused:

Tom78 10-13-2003 09:51 PM

Re: '72 Exhaust Suggestions (Tom78)
 
I tried looking up Flomaster 40 series, but they do not fit the '72. I have seen lots of ads in ecklers and mid america for Dynomax systems. I am just looking to replace the mufflers with something louder.

Any suggestions?

Tom

DJ Dep 10-13-2003 10:26 PM

Re: '72 Exhaust Suggestions (Tom78)
 
How about a nice 427-454 engine? Beer can valves always make nicer sounds than dime sized ones :lol: :lol: :lol:

Dep


Fang S-289 10-13-2003 10:32 PM

Re: '72 Exhaust Suggestions (DP77Vette)
 

:D I like my chambered, Just added headers, don't seem too loud to me!! How do they rob HP??? :confused:
I was wondering the same thing. I don't have headers and there is some resonance, but I don't really think it's too loud. I'm waiting until they get "Burned In" before I make a final desision on the resonance. I may consider trying an "H" pipe if they don't mellow sufficiently.

Crash Dummy 10-13-2003 10:34 PM

Re: '72 Exhaust Suggestions (Dep)
 

How about a nice 427-454 engine? Beer can valves always make nicer sounds than dime sized ones :lol: :lol: :lol:

Dep

Yep.... that sounds like a cheap solution! And just kidding of course. There is definitely a different sound though.

Tom78 10-14-2003 10:05 AM

Re: '72 Exhaust Suggestions (Tom78)
 
Seriously though, all kidding aside, I would like a serious recommendation for muffler configurations on a '72 350. :thumbs:

I want a much deeper tone than the stock mufflers on there.

Please Advise!
Tom

OHSIXX 10-14-2003 10:13 AM

Re: '72 Exhaust Suggestions (Tom78)
 
I have 2 1/2 inch pipes going back to Borlas. It is not quiet and not loud; sorta a mid-range tone.

Soon will be going to side pipes! :)

Milest 10-14-2003 10:18 AM

Re: '72 Exhaust Suggestions (OHSIXX)
 
2 1/2" and Dynomax Super Turbos from Ecklers, Mid America. Is what I have, I like the sound bo too much, but louder than stock.

Tom78 10-14-2003 10:56 AM

Re: '72 Exhaust Suggestions (Tom78)
 
I find the Chambered Exhaust here interesting.

http://www.madvet.com/shop?store=4.&frame=1293

How much can I trust the description they give? So far I have seen one negative comment about this system.

Tom

Fevre 10-14-2003 11:03 AM

Re: '72 Exhaust Suggestions (Tom78)
 
Flowmaster can be fitted by a good muffler shop, have them on my 73 and like em. They do produce a dronning sound at about 3500 rpm's but a crossover pipe helps eliminate that. Serious 50 are a little quieter. I have heard the ultra flows on forum member gdh's 72 and they sound great too.

The chambered mufflers rob power because of their design, they are a section of pipe with a bunch of dimples in them that dissrupts air flow, but do sound :cool: , loud but :cool: .

DJ Dep 10-14-2003 12:38 PM

Re: '72 Exhaust Suggestions (Fevre)
 
CHERYBOMBS!!
Okay...I'm an old fart and we either installed Cherry Bombs or Smittys.
Whatta I know about Flow this and Chambered that? :D
If you want performance you take OFF the mufflers and run straight out the headers. If you want noise you put on BOMBS or header mufflers. It was a simpler day back then :)

Dep

Tom78 10-14-2003 12:41 PM

Re: '72 Exhaust Suggestions (Dep)
 
Anyone have any product links for these things so I can check it out?

l2vette 10-14-2003 03:42 PM

Re: '72 Exhaust Suggestions (Tom78)
 
I put the factory LT1 reproduction 2 1/2" aluminized pipes and Magnaflow mufflers on my '72, 350, Sounds great, gives it that muscle car era sound!! I bought the whole setup from Corvette Central. Bolted up perfectly, from the manifold all the way back to the exhaust tips!!
:cool:

Gordonm 10-14-2003 06:38 PM

Re: '72 Exhaust Suggestions (l2vette)
 
I have Delta Flow 50s on mine. They are bigger than the 40s and they fit fine. I had a custom system put on but the sound is great. Loud enough when you are on it but quiet enough not to call every cop for miles around. I also have an H pipe

1972 Shark 10-14-2003 07:21 PM

Re: '72 Exhaust Suggestions (Tom78)
 
Got the Dynomax Super Turbos on my 72 now, and it sounds good to me!

72 350 TH400, and a few bolt ons added:D
http://home.comcast.net/~thayermj/ws...7/site1002.jpg

1972 Shark 10-14-2003 07:44 PM

Re: '72 Exhaust Suggestions (Tom78)
 
Also check out this thread. We had a disscusion on duals earlier today!

http://forums.corvetteforum.com/zero...582#1545391582

Tom78 10-14-2003 08:14 PM

Re: '72 Exhaust Suggestions (Tom78)
 
Whats the best place to look to get Dynomax Ultra Flo or Super Turbo mufflers that will fit without modifications on a '72?

Thanks for all your help! I really do appreciate it!

Tom

73jst4fun 10-14-2003 08:21 PM

Re: '72 Exhaust Suggestions (Gordonm)
 
Tom, Gordonm and myself have the same custom 2 1/2" exhaust on our vettes. He has a 72 and I have a 73, the delta 50 series fit fine. You just need a good muffler shop to do the work for you. Here's a site where you can look at my system... http://members.cardomain.com/73jst4fun and tell me what you think :seeya


All times are GMT -4. The time now is 09:43 PM.


© 2024 MH Sub I, LLC dba Internet Brands