Reset change oil light. (help)
Pro
Joined: Jan 2004
Posts: 653
Likes: 0
From: Northern New Jersey
St. Jude Donor '03-'05-'06-'07-'08
1 - Turn key to RUN, but don't start engine
2 - Press ENG MET on the trip monitor. Then within 5 seconds, press it again.
3 - Within 5 seconds press and hold GAUGES on the trip monitor. The CHANGE OIL light should start to flash.
4 - Hold the GAUGES button till the CHANGE OIL light stops flashing and goes out. This should take about 10 seconds.
When the light goes out the monitor is reset. If the monitor doesn't reset, turn the ignition off, then try again.
2 - Press ENG MET on the trip monitor. Then within 5 seconds, press it again.
3 - Within 5 seconds press and hold GAUGES on the trip monitor. The CHANGE OIL light should start to flash.
4 - Hold the GAUGES button till the CHANGE OIL light stops flashing and goes out. This should take about 10 seconds.
When the light goes out the monitor is reset. If the monitor doesn't reset, turn the ignition off, then try again.
