FAST Manifold Special:This week only
Thread Starter
Tech Contributor
Joined: Mar 2003
Posts: 12,094
Likes: 197
From: Colorado Springs, CO
St. Jude Donor '08-'09-'10-'11
FAST Manifold Special:This week only
Get a ported and fully prepped FAST manifold for your 2005-2007 C6. Pricing is for orders placed and paid for from March 16-20 only.
$339.00 normal pricing.
$275.00 includes:
Return shipping up to $20 is included
An note about the rear graft install: Some manifolds were done using Automotive Goop in the red bottle. I dont know which customers had this type used. It apparently has a different temp threshold than the normally used purple Goop. The issue has raised some questions and has led me to realize that since I have seen and repaired manifolds that had 2 part epoxies crack due to different thermal expansions, that I dont feel comfortable relying on any adhesive to hold the graft in place. All manifolds done now will have an internal brace that uses screws to hold the graft in place and an epoxy only to fill in for an air seal. Its overkill but I dont want any room for doubt from now on. Anyone wanting this new fix can send me the manifold for a free update at my expense. There wasnt much by way of profit with donations in the equation but I dont feel its right to have a doubt even if its a loss financially so I have to do this and make it available to anyone who feels they may have been affected. Affected manifolds would have the glue bulging in the back of the manifold in the graft area and it can be seen if the throttle body is off. Scans of the car would show big positive short term fuel trends. I'm sorry to those affected but I will do whatever it takes to make it right. Newer manifolds will be immune to this issue.
PAYPAL requires 3% fee
Manifold completed:
High gloss finish:
Experience is the key here. Having prepped well over 100 of these, dont get caught up with buying a quick port job without the mod to the back dont right. I have had to redo a fair share of these manifolds that used hard epoxy glues that crack over time and simply look really bad and some just dont fit. Get it done right the first time.
PM for order info.
$339.00 normal pricing.
$275.00 includes:
Mod to the back (no cutting firewall)
Porting (runners and plenum area)
Injector o-rings INCLUDED
MAP relocation eliminates the MAP extension wire
Painted to match the factory look
Full reseal
Porting (runners and plenum area)
Injector o-rings INCLUDED
MAP relocation eliminates the MAP extension wire
Painted to match the factory look
Full reseal
Return shipping up to $20 is included
An note about the rear graft install: Some manifolds were done using Automotive Goop in the red bottle. I dont know which customers had this type used. It apparently has a different temp threshold than the normally used purple Goop. The issue has raised some questions and has led me to realize that since I have seen and repaired manifolds that had 2 part epoxies crack due to different thermal expansions, that I dont feel comfortable relying on any adhesive to hold the graft in place. All manifolds done now will have an internal brace that uses screws to hold the graft in place and an epoxy only to fill in for an air seal. Its overkill but I dont want any room for doubt from now on. Anyone wanting this new fix can send me the manifold for a free update at my expense. There wasnt much by way of profit with donations in the equation but I dont feel its right to have a doubt even if its a loss financially so I have to do this and make it available to anyone who feels they may have been affected. Affected manifolds would have the glue bulging in the back of the manifold in the graft area and it can be seen if the throttle body is off. Scans of the car would show big positive short term fuel trends. I'm sorry to those affected but I will do whatever it takes to make it right. Newer manifolds will be immune to this issue.
PAYPAL requires 3% fee
Manifold completed:
High gloss finish:
Experience is the key here. Having prepped well over 100 of these, dont get caught up with buying a quick port job without the mod to the back dont right. I have had to redo a fair share of these manifolds that used hard epoxy glues that crack over time and simply look really bad and some just dont fit. Get it done right the first time.
PM for order info.
Last edited by SpinMonster; May 6, 2009 at 04:03 AM.
Thread Starter
Tech Contributor
Joined: Mar 2003
Posts: 12,094
Likes: 197
From: Colorado Springs, CO
St. Jude Donor '08-'09-'10-'11
The list of what it includes is above, which does not list the manifold itself. I checked again just in case, but it isnt included.
I am always working on the pricing for the manifold but the best at this time appears to be $830 from Hinson Super cars. They havent messed up a single order and all arrive when they say it will and in good shape. Shipping to me is included saving the extra cost and shipping step.
I am always working on the pricing for the manifold but the best at this time appears to be $830 from Hinson Super cars. They havent messed up a single order and all arrive when they say it will and in good shape. Shipping to me is included saving the extra cost and shipping step.
Former Vendor
Joined: Feb 2007
Posts: 17,337
Likes: 39
From: Birmingham, AL www.hinsonsupercars.com 205-909-9402
Pro
Joined: Nov 2007
Posts: 605
Likes: 15
From: Rocky Mountains Colorado
Great deal! I have been awaiting the arrival of my ported TB so I can complete the install of my SpinFAST. This latest deal offered by Spin will save you $55.00 over what is a great deal at $330.00. If you have been on the fence, now is the time to act. FedEx was to have delivered my TB on Friday the 13th. The FedEx driver was new and thought our address was bad and returned my TB to the FedEx terminal in Denver. Rescheduled delivery is for Tuesday the 17th. If not for this screw-up in delivery I could be reporting to everyone on how I'm enjoying my SpinFAST Mod!!
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
Former Vendor
Joined: Feb 2007
Posts: 17,337
Likes: 39
From: Birmingham, AL www.hinsonsupercars.com 205-909-9402
that is a killer price and the portwork is AAwweeeesome!!!!
Hi Spin, how ya doing pal?
Thread Starter
Tech Contributor
Joined: Mar 2003
Posts: 12,094
Likes: 197
From: Colorado Springs, CO
St. Jude Donor '08-'09-'10-'11
Former Vendor
Joined: Feb 2007
Posts: 17,337
Likes: 39
From: Birmingham, AL www.hinsonsupercars.com 205-909-9402