Silver c6 with zr1 ground effects?
Thread Starter
Racer
Joined: Oct 2015
Posts: 288
Likes: 5
From: North Carolina
Silver c6 with zr1 ground effects?
I'm looking at doing the front splitter and side skirts on my base c6. I was wondering anyone had pictures of there SILVER c6 with these already done. Thanks in advance!
Race Director
Joined: Oct 2010
Posts: 14,475
Likes: 785
From: Las Vegas NV
If I try to turn left into my driveway the splitter will scrape due to the angle of the road. Right turn in is fine. Other than that there were a couple dips in the road with minor scrapes but its held up good with no damage. The side skirts have never scraped anything. You do need to be careful.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Drifting
Joined: Nov 2011
Posts: 1,843
Likes: 330
From: western NY
Race Director
Joined: Oct 2010
Posts: 14,475
Likes: 785
From: Las Vegas NV
And wouldn't you know it, after I posted today about not having any mishaps I actually cracked my splitter tonight leaving a parking lot that had too much of a dip in it. I should have knocked on wood.
Drifting
Joined: Nov 2011
Posts: 1,843
Likes: 330
From: western NY
Interesting. Mine are not CF. They are fiberglass and did not have that sticker on them.
And wouldn't you know it, after I posted today about not having any mishaps I actually cracked my splitter tonight leaving a parking lot that had too much of a dip in it. I should have knocked on wood.
And wouldn't you know it, after I posted today about not having any mishaps I actually cracked my splitter tonight leaving a parking lot that had too much of a dip in it. I should have knocked on wood.
The OP mentioned ZR1 ground effects so on the chance he was considering Carbon Fiber parts, I figured he may be interested in my experience with RPI recently....and spend his hard earned money accordingly. My guess is some dumb**s over there forgot to peel the stickers off the last batch they got off the boat.
I have a 'Made in Taiwan' replacement splitter for you if you want... (At least I believe in 'truth in advertising')....
j/kJoe T.
Last edited by jft69z; Apr 14, 2016 at 06:36 AM.
