Mild to Wild install

Reply Subscribe

Thread Tools

Search this Thread

Aug 20, 2016 | 03:42 PM

lwise4

Thread Starter

Burning Brakes

Joined: Aug 2006

Posts: 1,147

Likes: 18

From: Thompsons Station Tennessee

Mild to Wild install

I installed the Mild to Wild unit today and it does not work! Before installing, I printed out the instructions on nakidparts.com. During the install, the red wire which is crimped came apart so I had to recrimp it.

I checked and double checked the install and it does not work. I pulled both remotes apart and checked the batteries and reformed the holders as suggested.

The unit came Priority mail and had a little slip of paper enclosed thanking me for the purchase and to email them if there are problems!

First problem no email address!!! Second problem site nakidparts.com down.

Does anyone know how to get in touch with these folks?

Aug 20, 2016 | 04:52 PM

tennblkc6

Melting Slicks

Joined: Nov 2013

Posts: 2,587

Likes: 69

From: Memphis Tn

not sure this helps but the fuse dont looked like its seated properly in the fuse holder.

Aug 20, 2016 | 04:56 PM

lwise4

Thread Starter

Burning Brakes

Joined: Aug 2006

Posts: 1,147

Likes: 18

From: Thompsons Station Tennessee

Quote:

Originally Posted by tennblkc6

not sure this helps but the fuse dont looked like its seated properly in the fuse holder.

I will check it out thanks. I had to pull it out a couple of times to check it, I may have moved it?

Aug 20, 2016 | 05:36 PM

beachcomber

Drifting

Joined: Sep 2010

Posts: 1,581

Likes: 50

From: Prosper TX

Isn't it upside down? I'm pretty sure the directions specifically said to have the red wire on the top and right side. Not sure if it matters, but mine said that.

Aug 20, 2016 | 05:52 PM

lwise4

Thread Starter

Burning Brakes

Joined: Aug 2006

Posts: 1,147

Likes: 18

From: Thompsons Station Tennessee

Quote:

Originally Posted by beachcomber

Isn't it upside down? I'm pretty sure the directions specifically said to have the red wire on the top and right side. Not sure if it matters, but mine said that.

The instructions specifically say the white wire should be facing up and the Red wire facing the center console. I believe that is how mine is set up?

I will check the fuse tomorrow and I just checked their site and it is now up so I will be able to email them.

Thanks ps; I printed out their instructions along with pictures from their site nakidparts.com.

Aug 21, 2016 | 12:24 PM

lwise4

Thread Starter

Burning Brakes

Joined: Aug 2006

Posts: 1,147

Likes: 18

From: Thompsons Station Tennessee

Quote:

Originally Posted by tennblkc6

not sure this helps but the fuse dont looked like its seated properly in the fuse holder.

The fuse was OK that is as far in as it goes.

Aug 21, 2016 | 12:46 PM

lwise4

Thread Starter

Burning Brakes

Joined: Aug 2006

Posts: 1,147

Likes: 18

From: Thompsons Station Tennessee

instructions

Quote:

Originally Posted by beachcomber

Isn't it upside down? I'm pretty sure the directions specifically said to have the red wire on the top and right side. Not sure if it matters, but mine said that.

I got the email address today it is leeacustoms@***.net

Last edited by lwise4; Aug 21, 2016 at 12:47 PM. Reason: add information