[ZR1] Scrape Armor skidplate
#1
Racer
Thread Starter
Scrape Armor skidplate
Hello! Anyone install this or something similar to their car?
#2
Melting Slicks
Member Since: Jul 2014
Location: The Lowcountry South Carolina
Posts: 2,782
Received 314 Likes
on
258 Posts
#3
Racer
Thread Starter
#4
Racer
Thread Starter
So no one has ever installed a skid plate?
#6
I don’t think this will work with the Zr-1 splitter.
#7
Racer
Thread Starter
#9
I have them as well, made of the same great material, for a more affordable price.
there are units for the base model as well as the Grand sport/Z06 model.
https://www.corvetteforum.com/forums...ase-model.html
#10
Racer
Thread Starter
Mark,
I have them as well, made of the same great material, for a more affordable price.
there are units for the base model as well as the Grand sport/Z06 model.
https://www.corvetteforum.com/forums...ase-model.html
I have them as well, made of the same great material, for a more affordable price.
there are units for the base model as well as the Grand sport/Z06 model.
https://www.corvetteforum.com/forums...ase-model.html
Last edited by Mark Ca; 02-21-2018 at 05:53 PM.
#11
My Grand Sport/Z06 plates will fit on your car, but only if you are willing to run the car without the splitter installed. (the OEM splitter construction is impossible to attach the plates to)
https://www.corvetteforum.com/forums...t-and-z06.html
And I also have a splitter replacement for these cars that is made from the same super durable stuff as the skidplates,
https://www.corvetteforum.com/forums...t-and-z06.html
But my splitter is geared towards the racecar/autocross guys, and might not really be elegant enough for streetcar use.
https://www.corvetteforum.com/forums...t-and-z06.html
And I also have a splitter replacement for these cars that is made from the same super durable stuff as the skidplates,
https://www.corvetteforum.com/forums...t-and-z06.html
But my splitter is geared towards the racecar/autocross guys, and might not really be elegant enough for streetcar use.
#12
Racer
Thread Starter
My Grand Sport/Z06 plates will fit on your car, but only if you are willing to run the car without the splitter installed. (the OEM splitter construction is impossible to attach the plates to)
https://www.corvetteforum.com/forums...t-and-z06.html
And I also have a splitter replacement for these cars that is made from the same super durable stuff as the skidplates,
https://www.corvetteforum.com/forums...t-and-z06.html
But my splitter is geared towards the racecar/autocross guys, and might not really be elegant enough for streetcar use.
https://www.corvetteforum.com/forums...t-and-z06.html
And I also have a splitter replacement for these cars that is made from the same super durable stuff as the skidplates,
https://www.corvetteforum.com/forums...t-and-z06.html
But my splitter is geared towards the racecar/autocross guys, and might not really be elegant enough for streetcar use.