C7 General Discussion General C7 Corvette Discussion not covered in Tech
Sponsored by:
Sponsored by:

Z51 Rear Spoiler Choices

Thread Tools
 
Search this Thread
 
Old 07-18-2018, 08:24 AM
  #1  
daveven
Racer
Thread Starter
 
daveven's Avatar
 
Member Since: Aug 2005
Location: trenton nj
Posts: 289
Received 20 Likes on 10 Posts

Default Z51 Rear Spoiler Choices

Loooking at the Z51 rear spoiler that tapes on. Who has installed this type and how does it look ? Any pics ? Just can't get myself to drill holes in my new 2019.
Old 07-18-2018, 09:58 AM
  #2  
Superstar555
Racer
 
Superstar555's Avatar
 
Member Since: Dec 2004
Posts: 376
Received 82 Likes on 56 Posts

Default

I did it, and would 100% do it again. Between the 3M tape and the silicone adhesive, it ain't coming off until I want it off.

https://www.corvetteforum.com/forums...post1597478148
Old 07-18-2018, 11:15 AM
  #3  
daveven
Racer
Thread Starter
 
daveven's Avatar
 
Member Since: Aug 2005
Location: trenton nj
Posts: 289
Received 20 Likes on 10 Posts

Default

Originally Posted by Superstar555
I did it, and would 100% do it again. Between the 3M tape and the silicone adhesive, it ain't coming off until I want it off.

https://www.corvetteforum.com/forums...post1597478148
Is that the Brand ( DAR ) that you used ?
Old 07-18-2018, 11:38 AM
  #4  
BlackHoleGravity
Heel & Toe
 
BlackHoleGravity's Avatar
 
Member Since: Jun 2015
Location: Tucson Arizona
Posts: 22
Likes: 0
Received 14 Likes on 6 Posts
Default

I had one already installed on the 2016 C7 I recently purchased from a dealer in Phoenix, it looked good, but I noticed the 3M tape was letting go and the spoiler was lifting up on both sides. I gets very hot in Arizona and I didn't feel comfortable with the idea of the spoiler coming off at speed on the highway. I had the dealer replace the spoiler with the OEM Z51 spoiler which is bolted on...much happier now. If you don't live in an extreme climate, you'll probably be fine.
Old 07-18-2018, 05:01 PM
  #5  
Superstar555
Racer
 
Superstar555's Avatar
 
Member Since: Dec 2004
Posts: 376
Received 82 Likes on 56 Posts

Default

Originally Posted by daveven
Is that the Brand ( DAR ) that you used ?
Yes...but if you get an account on eBay sometimes they send out a 20% off coupon for anything. Both TheSpoilerCompany and WingTech (eBay stores) resell the DAR product so you can save some money.

Whatever you do, my advice is to LET THEM PAINT IT, and specifically request "3M ONLY INSTALL".
Old 07-18-2018, 05:46 PM
  #6  
ExtremeOnlineStore
Supporting Vendor
 
ExtremeOnlineStore's Avatar
 
Member Since: Oct 2017
Location: US CA
Posts: 2,368
Received 128 Likes on 109 Posts
Default

Originally Posted by daveven
Loooking at the Z51 rear spoiler that tapes on. Who has installed this type and how does it look ? Any pics ? Just can't get myself to drill holes in my new 2019.
You may check out our store for more Parts & Accessories for your C7 Z51. If your Z51 do not contain a rear spoiler originally, you will need to drill holes in order to install the spoiler. Let us know if you have any questions. Thanks

iSpeedTuning C7 Parts & Accessories

SHOP NOW

Corvette C7 Stage 2 & 3 Rear Spoiler
........................................ ........................................ ........................................ ........................................ ........................................ ........................................ ......................................

Carbon Fiber


Corvette C7 Carbon Fiber Stage 2 Rear Spoiler $539.99 $449.99

Corvette C7 Carbon Fiber Stage 3 Rear Spoiler W/
WickerBill Extension $649.99 $569.99

Carbon Flash

Corvette C7 Carbon Flash Stage 2 Rear Spoiler $409.99 $349.99

Corvette C7 Carbon Flash Stage 3 Rear Spoiler ( Light / Dark Tinted Extension) $569.99 $469.99

Primer Black

Corvette C7 Primer Black Stage 2 Rear Spoiler $349.99 $299.99


Corvette C7 Primer Black Stage 3 Rear Spoiler ( Light / Dark Tinted Extension)$419.99







........................................ ........................................ ........................................ ........................................ ........................................ ........................................ ......................................


Features:


Effectively maximizes the aerodynamic attributes of your Corvette C7


All of our items are manufactured by following the ASTM Durability of Nonmetallic Material Standards. In order to reduce the chance of crack and break, we use high-quality Carbon Fiber and Polypropylene to manufacture unique parts that are more durable than any other materials.


-------------------------------------------------------------------------


Shipping & Handling time:


We offer FREE domestic shipping up to 48 states. All orders will be shipped within 2-3 business days. Every item will be inspected and re-polished before we ship out the orders.


Canada and International Shipping


Shipping fee will be charged for Canada and international orders. Shipping cost will be shown after customer filled in the shipping address.


If there are circumstances that we can not fulfill your order, we will notify you by email on the next business day.


------------------------------------------------------------------------

About Us

Old 07-19-2018, 03:56 AM
  #7  
Skid Row Joe
Team Owner
 
Skid Row Joe's Avatar
 
Member Since: Sep 2010
Posts: 27,319
Received 4,001 Likes on 2,888 Posts

Default



My C7's Z51 spoiler

​​​​​​​
Old 07-19-2018, 08:14 AM
  #8  
daveven
Racer
Thread Starter
 
daveven's Avatar
 
Member Since: Aug 2005
Location: trenton nj
Posts: 289
Received 20 Likes on 10 Posts

Default

Was thinking of going with the stock Z51 style in Carbon Flash metallic. My car is Longbeach Red Convt. I think the Cabon Flash matches the rear bumper color ?
Old 07-19-2018, 08:44 AM
  #9  
dfettero
Burning Brakes
 
dfettero's Avatar
 
Member Since: Jan 2016
Posts: 923
Received 221 Likes on 137 Posts
Default Drill Baby Drill

Drill Baby Drill

Originally Posted by daveven
Loooking at the Z51 rear spoiler that tapes on. Who has installed this type and how does it look ? Any pics ? Just can't get myself to drill holes in my new 2019.
Old 07-19-2018, 12:25 PM
  #10  
TEXHAWK0
Le Mans Master
 
TEXHAWK0's Avatar
 
Member Since: Sep 2003
Location: Longview Texas
Posts: 8,847
Received 787 Likes on 539 Posts

Default

You don't HAVE to attach spoiler with bolts... only if you want to keep it...
Tape may work on side molding and emblems, but I would never rely on tape to hold a large aerodynamic part.
Over time heat and aerodynamic forces can cause the tape to release. You will never take it off, so just drill the holes and be done with it..
Old 07-19-2018, 03:58 PM
  #11  
Skid Row Joe
Team Owner
 
Skid Row Joe's Avatar
 
Member Since: Sep 2010
Posts: 27,319
Received 4,001 Likes on 2,888 Posts

Default



Big Lebowski's, sharp looking C7, vert.
​​​​​​​
Originally Posted by daveven
Was thinking of going with the stock Z51 style in Carbon Flash metallic. My car is Longbeach Red Convt. I think the Cabon Flash matches the rear bumper color ?
I think the contrast of the dark carbon flash spoiler,, and the black lower rear end panels would be sharp. The contrast is shown below in Torch Red, on member; Big Lebowski's C7 vert:

Last edited by Skid Row Joe; 07-19-2018 at 04:00 PM.
Old 07-19-2018, 10:47 PM
  #12  
REZ1
Burning Brakes
 
REZ1's Avatar
 
Member Since: Jul 2006
Location: FT. MYERS BEACH FLORIDA
Posts: 809
Received 97 Likes on 72 Posts

Default

3M...5200...you'l never get it off....
The following users liked this post:
Y2KOOLVETTE (03-13-2024)
Old 07-20-2018, 10:17 AM
  #13  
daveven
Racer
Thread Starter
 
daveven's Avatar
 
Member Since: Aug 2005
Location: trenton nj
Posts: 289
Received 20 Likes on 10 Posts

Default

Originally Posted by REZ1
3M...5200...you'l never get it off....
What is 5200 ?
Old 07-21-2018, 05:46 AM
  #14  
0Quik Z06
Former Vendor
 
Quik Z06's Avatar
 
Member Since: Oct 2003
Location: Devil's Island CA
Posts: 8,479
Received 411 Likes on 280 Posts

Default

Yea 3M VHB is super strong. Used it on a wing on my old C5 and the wing is still on there, rock solid 6 years later.
The following users liked this post:
Y2KOOLVETTE (03-13-2024)
Old 07-21-2018, 12:55 PM
  #15  
65fastback
Burning Brakes
 
65fastback's Avatar
 
Member Since: Mar 2018
Posts: 856
Received 346 Likes on 238 Posts
Default

Originally Posted by daveven
Loooking at the Z51 rear spoiler that tapes on. Who has installed this type and how does it look ? Any pics ? Just can't get myself to drill holes in my new 2019.

I had this same dilemma and ended up going with a tape on Z51 style in carbon flash from southern car parts, it was about $300 and took a couple weeks to receive. To install a OEM style with studs
is a pain in the @ss ALOT of folks including me dont want to start pulling parts and panels off there brand new vette if there are other good options available.

Its simple... THE TAPE WORKS.


Last edited by 65fastback; 07-21-2018 at 12:56 PM.
Old 07-21-2018, 02:31 PM
  #16  
BlackHoleGravity
Heel & Toe
 
BlackHoleGravity's Avatar
 
Member Since: Jun 2015
Location: Tucson Arizona
Posts: 22
Likes: 0
Received 14 Likes on 6 Posts
Default

This is what the 3M tape on my spoiler looked like after less than 2 years in Arizona...I had the dealership replace the spoiler with the OEM spoiler when I purchased the vehicle at 9K miles.



Last edited by BlackHoleGravity; 07-21-2018 at 03:22 PM.
The following users liked this post:
76-Vetteman (03-13-2024)
Old 07-21-2018, 04:11 PM
  #17  
65fastback
Burning Brakes
 
65fastback's Avatar
 
Member Since: Mar 2018
Posts: 856
Received 346 Likes on 238 Posts
Default

Definitely not the first time ive been wrong. I can see how outside 100+ temps daily could cause this.

Get notified of new replies

To Z51 Rear Spoiler Choices

Old 07-21-2018, 05:28 PM
  #18  
Gearhead Jim
Team Owner
Support Corvetteforum!
 
Gearhead Jim's Avatar
 
Member Since: Sep 2000
Location: Far NW 'burbs of Chicago
Posts: 23,940
Received 2,051 Likes on 1,362 Posts
St. Jude Donor '13

Default

We have the stock Z51 spoiler, which (to my eye) looks about right, not too big and not too small. Your opinion may differ.

Visibility out the rear is bad enough, I wouldn't want to cut that down any more.

If you carry luggage in your trunk like we often do, wait a month or two for the paint to cure and then have the spoiler covered with XPel or something similar. Actually, we have a scratch in the XPel (but not the paint beneath) that came when the targa slipped out of our hands while putting into the trunk.
Old 07-23-2018, 01:58 PM
  #19  
Superstar555
Racer
 
Superstar555's Avatar
 
Member Since: Dec 2004
Posts: 376
Received 82 Likes on 56 Posts

Default

Originally Posted by BlackHoleGravity
This is what the 3M tape on my spoiler looked like after less than 2 years in Arizona...I had the dealership replace the spoiler with the OEM spoiler when I purchased the vehicle at 9K miles.


This doesn't look like the correct 3M VHB tape at all. It also looks like the spoiler warped.

Given that you didn't install this yourself and can't speak to the variables (tape type, surface prep, etc), I'd suggest that this isn't a valid data point.
Old 07-23-2018, 02:37 PM
  #20  
RapidC84B
Team Owner
 
RapidC84B's Avatar
 
Member Since: Feb 2013
Posts: 20,214
Received 13,165 Likes on 5,989 Posts

Default

My color matched APR






Last edited by RapidC84B; 07-23-2018 at 02:38 PM.


Quick Reply: Z51 Rear Spoiler Choices



All times are GMT -4. The time now is 01:51 AM.