FS: C6 Parting Out
#3
Instructor
Thread Starter
Member Since: Apr 2014
Location: Stockton California
Posts: 121
Received 0 Likes
on
0 Posts
Sorry, no Z06 rear spoiler.
I realize my posting was too vague. I will edit to add the parts that will be listed just won't have photos or prices until they are off the car.
I realize my posting was too vague. I will edit to add the parts that will be listed just won't have photos or prices until they are off the car.
#12
Instructor
Thread Starter
Member Since: Apr 2014
Location: Stockton California
Posts: 121
Received 0 Likes
on
0 Posts
I just pulled them off and haven't had a chance to clean them. I am planning to list them for $300. They were "Modified" by the original owner. You can look at some threads on what that involves. Basically means a pipe was welded around the perforated straight through pipe so it is louder when valve is open but normal quiet in the closed mode.
Here is a link to a thread describing the procedure.
https://www.corvetteforum.com/forums...with-pics.html
Here is a link to a thread describing the procedure.
https://www.corvetteforum.com/forums...with-pics.html
Last edited by Kurtle; 09-13-2018 at 12:20 PM.
#13
Instructor
I just pulled them off and haven't had a chance to clean them. I am planning to list them for $300. They were "Modified" by the original owner. You can look at some threads on what that involves. Basically means a pipe was welded around the perforated straight through pipe so it is louder when valve is open but normal quiet in the closed mode.
Here is a link to a thread describing the procedure.
https://www.corvetteforum.com/forums...with-pics.html
Here is a link to a thread describing the procedure.
https://www.corvetteforum.com/forums...with-pics.html
#14
Instructor
Thread Starter
Member Since: Apr 2014
Location: Stockton California
Posts: 121
Received 0 Likes
on
0 Posts
#20
Instructor
Thread Starter
Member Since: Apr 2014
Location: Stockton California
Posts: 121
Received 0 Likes
on
0 Posts