4.8/5.3 swap in my C6 base.
11-29-2018, 11:43 AM
#1
Cruising
Thread Starter
Member Since: Oct 2017
Location: Princeton LA
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
4.8/5.3 swap in my C6 base.
I’m currently in the process of building a 4.8/5.3 iron block for my base model C6 (05). I plan to turbo in the future. What rotating assemblies would y’all recommend? Links would be very much appreciated!
12-09-2018, 02:59 PM
#3
Just get a Gen 4 motor and leave the bottom end stock gap the rings for boost. This is exactly what i did for my z06 turbo setup but i am using an aluminum 5.3. Plenty of guys have made in the 8-900s on them. Shoot someone local to me traps in the 170s sbe.
If it breaks another $400 and send it again.
If it breaks another $400 and send it again.