When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Our C6 has this electric door opener, neatly flush with the rest of the inner side of the door and i don't like it that i am always have to "feel around" finding the center of rubber pad to activate the switch.
Even worse if a passenger tries to get in. They don't know how the door switch works and on several occasions i had to open the passenger door from the inside to let them in.
So i 3d printed two small buttons in matte black PLA, 12x15 mm, 3 mm high, rounded edges and superglued these on the door switch.
Now everybody feels instantly where to push the button without having to wander around.
No costs, high level of satisfaction!
Last edited by Renevette1982; Yesterday at 07:50 AM.
Reason: Inappropriate choice of words apperently
"When I was a child, I talked like a child, I thought like a child, I reasoned like a child. When I became a man, I put the ways of childhood behind me."
"When I was a child, I talked like a child, I thought like a child, I reasoned like a child. When I became a man, I put the ways of childhood behind me."
I can say with absolutely 0 hesitation... ^ that sounds awful
Being 14 at heart with disposable income is the best that's ever happened to me, dunno about you guys
Cheapest mod ever. Raised door button
