When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
anyone replaced the AC belt that can give a tip on procedure?. Thanks
Never done it. Looking at the procedure it looks fairly simple. Remove the "under body rear air deflector". That's just the belly pan. You can just cut the belt to remove the old one. The procedure shows the use of a tool to install the new belt, called a "stretchy belt installer". Then you rotate the crankshaft balancer with a wrench. "When the Stretchy Belt Installer(2). contacts the oil tank, the air conditioning compressor belt(1) will be installed on the air conditioning compressor pulley(3)." So it says. I have not done this.
I've done it when installing the V09 radiator (needed to remove the AC compressor for access). There's a stud with a nut on it (check out this thread and pics: https://www.corvetteforum.com/forums...n-install.html). There's a torx head on the stud. I removed it to allow the compressor to be moved out of the way (after removing the other two mounting bolts). Reversed process. Patience is key.
