Cam/Install in Tidewater?
Race Director
Joined: Dec 1999
Posts: 11,182
Likes: 2
From: Almost all Skyline Cruises Vettes at Waterside 1-5
Cruise-In I Veteran
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In IV Veteran
Cruise-In V Veteran
Cruise-In VI Veteran
Cruise-In VII Veteran
Originally Posted by AlanN
Anyone know of a good place to purchase a cam/springs/rods and have them installed in the tidewater area?
There's a place on Jefferson Avenue that doesn't have the greatest reputation.
Up here in Gloucester there is Wescott Automotive. Bob Clements is a vette guru. That's who I would talk to! Not only about the installation but your choice of cam etc.
Bob builds engines and, while he is highly opiniated, he is generally right
seeya
Melting Slicks
Joined: Apr 2005
Posts: 2,045
Likes: 4
From: Yorktown VA
NCM Sinkhole Donor
I installed a cam myself for the first time. Wasn't that hard. I took my heads to Apple's Machine shop and had them cleaned, installed new rockers, springs, and big valves. They did a great job. They're located on Rt 17, between I-64 and Victory Blvd.
Just don't take your vette to Tidewater Corvettes.
Just don't take your vette to Tidewater Corvettes.
