nned scan help in VA
Thread Starter
Burning Brakes
Joined: Apr 2006
Posts: 1,218
Likes: 7
From: Burleson Texas
nned scan help in VA
can anyone help me scan my gfs car? she just bought adam bocas 94 admiral blue 6spd, and now we have a world of problems. i need a scan to help me trouble shoot. i am in newport news and can drive a little ways, or will pay for some one to drive out. any help would be great, thanks
the title should be need* i split my fingers pulling o rings with a knife and now its hard to type with a bandaid on each index finger
the title should be need* i split my fingers pulling o rings with a knife and now its hard to type with a bandaid on each index finger
Pro
Joined: Jan 2005
Posts: 520
Likes: 0
From: Richmond Va
Thread Starter
Burning Brakes
Joined: Apr 2006
Posts: 1,218
Likes: 7
From: Burleson Texas
http://forums.corvetteforum.com/show....php?t=1399925
there it is in all its glory. a 6pg post of all kinds stuff to try to help...
i have recieved the schematics to make my own interface and start data logging tomorrow. i will post an update.
i know ive had my vette at your place before, you helped me with a dead #1 missfire. I called you today, but you were backed up till monday, im gonna do what i can until then!
there it is in all its glory. a 6pg post of all kinds stuff to try to help...
i have recieved the schematics to make my own interface and start data logging tomorrow. i will post an update.
I can scan it for you. I know you posted on our dyno day thread, were you out here? If you dont know where we are drop me a PM or call 757-424-1740. We got mad LT1 exp!!
Melting Slicks
Joined: Jul 2006
Posts: 3,356
Likes: 1
From: Chesapeake Va
scan?
Originally Posted by merlot566jka
http://forums.corvetteforum.com/show....php?t=1399925
there it is in all its glory. a 6pg post of all kinds stuff to try to help...
i have recieved the schematics to make my own interface and start data logging tomorrow. i will post an update.
i know ive had my vette at your place before, you helped me with a dead #1 missfire. I called you today, but you were backed up till monday, im gonna do what i can until then!
there it is in all its glory. a 6pg post of all kinds stuff to try to help...
i have recieved the schematics to make my own interface and start data logging tomorrow. i will post an update.
i know ive had my vette at your place before, you helped me with a dead #1 missfire. I called you today, but you were backed up till monday, im gonna do what i can until then!
You should have told me who you were. I can squeeze you in later today or tomorrow. Or you can just call me and I could probably point you in the right direction. Were you the caller that wanted to know how much for a MAF? I hate it when people swap parts at random with no diagnostic strategy. I believe in using the same methodical approach every time for consistant, accurate results. To everyone on here, if you call me for service please let me know you are forum members, beachcombers, ratpackers, etc, for priority service! Sending you a PM.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Thread Starter
Burning Brakes
Joined: Apr 2006
Posts: 1,218
Likes: 7
From: Burleson Texas
You should have told me who you were. I can squeeze you in later today or tomorrow. Or you can just call me and I could probably point you in the right direction. Were you the caller that wanted to know how much for a MAF? I hate it when people swap parts at random with no diagnostic strategy. I believe in using the same methodical approach every time for consistant, accurate results. To everyone on here, if you call me for service please let me know you are forum members, beachcombers, ratpackers, etc, for priority service! Sending you a PM.
Today 01:16 AM
Today 01:16 AM
i left a message at your shop
Racer
Joined: Jan 2004
Posts: 455
Likes: 0
From: Newport News VA
Jon,
Just finished reading the other thread. Man, you are persistent! I think I would have taken it to Ed long ago. Sorry to hear about your problems, but you have already exhausted all my suggestions. Good luck! Hope to see you Saturday at Hooters!
Just finished reading the other thread. Man, you are persistent! I think I would have taken it to Ed long ago. Sorry to hear about your problems, but you have already exhausted all my suggestions. Good luck! Hope to see you Saturday at Hooters!