Alignment in Hampton Roads
Thread Starter
Racer
Joined: Feb 2001
Posts: 451
Likes: 0
From: Chesapeake VA
Alignment in Hampton Roads
After a few thousand miles I think my '08 is slightly out of alignment. Who has a recommendation on a good alignment shop? Does Hunter still make the best alighment machines or is it the technician that matters most???
Pro
Joined: Jul 2002
Posts: 513
Likes: 2
From: Virginia Beach Va
Frank,
You need to contact Rex Harris at Performance Tire and Wheel Services. He's a Beachcomber and we all go to him for wheel, tire and alignment work. He runs a HVAC service but does alignment work on is off time.
435-1880 is is cell...call him next week and he'll meet you there one afternoon.
1224 Executive Blvd Suite 106 Chesapeake, VA 23320
Jimmy
You need to contact Rex Harris at Performance Tire and Wheel Services. He's a Beachcomber and we all go to him for wheel, tire and alignment work. He runs a HVAC service but does alignment work on is off time.
435-1880 is is cell...call him next week and he'll meet you there one afternoon.
1224 Executive Blvd Suite 106 Chesapeake, VA 23320
Jimmy
Pro
Joined: Jul 2002
Posts: 513
Likes: 2
From: Virginia Beach Va
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
2027 Corvette vs The World: Every Model vs Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
5 MOST and 5 LEAST Popular Corvette Model Years in History!
Joe Kucinski
2027 Corvette Buyer's Guide: Everything You Need to Know!
Joe Kucinski
10 Things C8 Corvette Owners Hate (But Won't Tell You)
Joe Kucinski
10 Best Corvettes Coming to Barrett-Jackson Palm Beach 2026!
Brett Foote
Every Corvette Grand Sport Explained! (C2, C4, C6, C7, & C8)
Joe Kucinski
Grand Sport & Grand Sport X Launch Alongside All-New 535hp LS6 V8!
Michael S. Palmer
5 Reasons Bad Drivers Crash & 5 Ways to Avoid a Costly Mistake!
Joe Kucinski
Thread Starter
Racer
Joined: Feb 2001
Posts: 451
Likes: 0
From: Chesapeake VA
I just returned from having my alignment done. Much better!
The factory settings were off, imagine that??? The left and right toe were both off 0.19 for a total of 0.38. Rex and George brought it down to 0.0 degrees.
If you are feeling any sense of the car pulling left or right you really need to have this done!
Happy Holidays,
Frank
The factory settings were off, imagine that??? The left and right toe were both off 0.19 for a total of 0.38. Rex and George brought it down to 0.0 degrees.
If you are feeling any sense of the car pulling left or right you really need to have this done!
Happy Holidays,
Frank
Last edited by 1953 C6; Dec 20, 2008 at 10:03 AM.
