Middle GA Corvette mechanic
#2
Burning Brakes
Scott, sorry to hear about your job man. I don't know if you remember me or not, a friend of mine named Matt and I used your lift about 2 years ago to install headers on his red 07 C6. Your lift was awesome and tons of help for us! I will ask around Macon and see if anyone needs your help or the lift. Good luck to ya!! Andy
#3
Le Mans Master
Thread Starter
Hey Andy. I remember you guys well and look for y'all around town all the time. Sure seems like there are a lot of C5's and C6's here in middle Georgia. Hopefully folks will get in touch with me when they need something. I just couldn't imagine paying out the nose for work at the dealer. Hope all is well and feel free to stop by anytime.
#4
Burning Brakes
I have a very close friend that lives right off of Wimbish so i'm always thinking about ya. Matt actually bought a cadillac so he's not in the Vette world anymore but he and I sure had a good time with his car down at Silver Dollar right before he traded it. I will surely come by and see ya sometime........Hope you and the family have a great Thanksgiving holiday! Talk to ya soon.
#6
Le Mans Master
Scott, sorry to hear about the job loss. If I hear of anyone looking for some vette work to be done I'll send them your way.
I may be looking at having headers installed in the spring. If I decide to do it you'll get the job!
Marc
I may be looking at having headers installed in the spring. If I decide to do it you'll get the job!
Marc
#9
Team Owner
Sorry to hear that Scott. I lost my job in March so I know how it is. I hope you can get lots of work. I don't have a vette anymore or live there anymore so I don't need any work done.
#11
Instructor
Member Since: Dec 2008
Location: Jacksonville Florida
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
PM me an estimated price for install of RPM Trans, New Converter, and differential into a 97A4. Ill be driving up from Jacksonville. This is probably a couple months away, so that i can get everything together and get the time off work.
Thanks!
Thanks!
#12
Le Mans Master
Let's get this back up top!
Scott, I may need to install shocks soon. Can't make up my mind on Bilsteins or C6 - Z06. I'll let you know when I'm ready.
Marc
Scott, I may need to install shocks soon. Can't make up my mind on Bilsteins or C6 - Z06. I'll let you know when I'm ready.
Marc
#13
Le Mans Master
Thread Starter
BTW - I have a practically new set of T1 shocks that might be a good option for you.
http://forums.corvetteforum.com/c6-p...cks-cheap.html
#15
Le Mans Master
Thread Starter
You need more shock travel if you are bottoming out. That would require an aftermarket shock.
#16
Melting Slicks
#18
Le Mans Master
Thread Starter
#20
Le Mans Master
Thread Starter
Thanks buddy.
Just finished up another clutch/torque tube job and a poly bushing install with a full track setup including alignment and corner balance for a fellow forum member and the car turned out great. It's gonna be fast. Thanks again Greg for the opportunity!
Just finished up another clutch/torque tube job and a poly bushing install with a full track setup including alignment and corner balance for a fellow forum member and the car turned out great. It's gonna be fast. Thanks again Greg for the opportunity!
Last edited by sperkins; 01-27-2011 at 01:46 AM.