When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I'm looking to build an LT1 396 stroker and wanted to hear everyone's opinions on who some good builders are in FL. I was going to look at http://www.corvettemasters.com They are behind Rogers Corvette in Maitland, FL. Any other leads? Looking for mid 11s, reliable, and mild mannered enough to be a daily driver (not crazy loud, rough idle, etc.) Tough, but not impossible by far.
Thanks
Re: Advice on engine builders in FL (92TripleBlack)
You could try Chris Petris. I dont have a phone number or anything. I know he is located in Lake Mary. He is usually in Corvette Fever and Vette Magazine.
Re: Advice on engine builders in FL (02MillenniumVette)
:iagree: ..Chris Petris, Corvette Clinic if he has time...407-323-7804...the only other person I'd suggest is Mike Norris, Norris Motorsports in Ocoee...407-656-2600... good luck
:iagree: ..Chris Petris, Corvette Clinic if he has time...407-323-7804...the only other person I'd suggest is Mike Norris, Norris Motorsports in Ocoee...407-656-2600... good luck
Re: Advice on engine builders in FL (92TripleBlack)
I personally haven't had anything done by them but all the ZR-1 guys just can't seem to say enough good things about SGC and the owner, Aaron. In addition to the ZR-1 stuff, they also have LT1/LT4 and LS1/6 packages. I don't know how local you want to remain but SGC looks to be just north of Tallahassee. Here's a link: http://www.sgvette.com/