(RCG)Progress report on my car...
Pro
Joined: Mar 2003
Posts: 634
Likes: 0
From: van down by the river NC
Re: (RCG)Progress report on my car... (W!ngnut)
I have some specs I was going to use for my upcoming alignment. I'd like to compare with what you and/or Donovan have. These are listed as "Aggressive Street". Who did the alignment? Same guy? 
Race Director
Joined: Oct 2003
Posts: 17,821
Likes: 0
From: Clayton, NC
Re: (RCG)Progress report on my car... (Dashzo6)
I have some specs I was going to use for my upcoming alignment. I'd like to compare with what you and/or Donovan have. These are listed as "Aggressive Street". Who did the alignment? Same guy?
If you are not in a hurrry I can give you a print-out of my alignment setting and what the factory recommended set-up is.
If you are not in a hurrry I can give you a print-out of my alignment setting and what the factory recommended set-up is.
Seriously I would appreciate it.
Race Director
Joined: Oct 2003
Posts: 17,821
Likes: 0
From: Clayton, NC
Re: (RCG)Progress report on my car... (barkingowl)
Now any GP's on 3:90's...blower cams?
Actually I think there is a GP going on right now on gears...
http://forums.corvetteforum.com/zerothread?id=840878
http://forums.corvetteforum.com/zero...=776907&page=2
Actually I think there is a GP going on right now on gears...
http://forums.corvetteforum.com/zerothread?id=840878
http://forums.corvetteforum.com/zero...=776907&page=2
I haven't ruled out Z0sence's prices completely.
Thread Starter
Drifting
Joined: Aug 2003
Posts: 1,313
Likes: 0
From: charlotte nc
Re: (RCG)Progress report on my car... (W!ngnut)
3.90s is too high man 
Bob at House of Wheels has the OEM black with polished lip at a good price!!! Cams are cheap--it's the install and retune that make it cost so much.
Look outside, I think I'll start building the second arc
Bob at House of Wheels has the OEM black with polished lip at a good price!!! Cams are cheap--it's the install and retune that make it cost so much.Look outside, I think I'll start building the second arc
Moderator
Joined: Jan 2001
Posts: 17,139
Likes: 3,772
From: Charlotte NC
Cruise-In IV Veteran
Cruise-In V Veteran
St. Jude Donor '08-'25
Re: (RCG)Progress report on my car... (blown in n.c.)
3.90s is too high man Bob at House of Wheels has the OEM black with polished lip at a good price!!! Cams are cheap--it's the install and retune that make it cost so much.
Look outside, I think I'll start building the second arc
Bob at House of Wheels has the OEM black with polished lip at a good price!!! Cams are cheap--it's the install and retune that make it cost so much.Look outside, I think I'll start building the second arc
Race Director
Joined: Oct 2003
Posts: 17,821
Likes: 0
From: Clayton, NC
Re: (RCG)Progress report on my car... (blown in n.c.)
3.90s is too high man Bob at House of Wheels has the OEM black with polished lip at a good price!!! Cams are cheap--it's the install and retune that make it cost so much.
Look outside, I think I'll start building the second arc
Bob at House of Wheels has the OEM black with polished lip at a good price!!! Cams are cheap--it's the install and retune that make it cost so much.Look outside, I think I'll start building the second arc
[Modified by W!ngnut, 9:50 AM 6/26/2004]
Race Director
Joined: Oct 2003
Posts: 17,821
Likes: 0
From: Clayton, NC
Re: (RCG)Progress report on my car... (blown in n.c.)
From the 12 miles I have on it, it's unbelievable!!! 
at how fast it turns and holds now.
at how fast it turns and holds now.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Thread Starter
Drifting
Joined: Aug 2003
Posts: 1,313
Likes: 0
From: charlotte nc
Re: (RCG)Progress report on my car... (W!ngnut)
Put some hard miles on the suspension this morning after completing the bedding process with the brakes. The car is so freakin tight and hugs the road, it's almost like a totally different animal. Took a 35mph curve at 80mph with very little effort! Makes the cost and install worth it, but the install was very involved and messy.
Donovan don't forget the money for the rotors and pads this Satuday, I may have to use it to eat and drink at Vinnies'! Gotta get a new windshield on the tahoe tomorrow as it caught a rock the size of a golfball on 85 yesterday!
Donovan don't forget the money for the rotors and pads this Satuday, I may have to use it to eat and drink at Vinnies'! Gotta get a new windshield on the tahoe tomorrow as it caught a rock the size of a golfball on 85 yesterday!
Pro
Joined: Mar 2003
Posts: 634
Likes: 0
From: van down by the river NC
Re: (RCG)Progress report on my car... (blown in n.c.)
Put some hard miles on the suspension this morning after completing the bedding process with the brakes. The car is so freakin tight and hugs the road, it's almost like a totally different animal. Took a 35mph curve at 80mph with very little effort! Makes the cost and install worth it, but the install was very involved and messy.
Donovan don't forget the money for the rotors and pads this Satuday, I may have to use it to eat and drink at Vinnies'! Gotta get a new windshield on the tahoe tomorrow as it caught a rock the size of a golfball on 85 yesterday!
Donovan don't forget the money for the rotors and pads this Satuday, I may have to use it to eat and drink at Vinnies'! Gotta get a new windshield on the tahoe tomorrow as it caught a rock the size of a golfball on 85 yesterday!
I'm looking forward to seeing how your car does on the next Serpent run
