Quality Motorsports
#1
Melting Slicks
Thread Starter
Member Since: Mar 2004
Location: Farmers Branch TX
Posts: 3,365
Likes: 0
Received 0 Likes
on
0 Posts
Cruise-In VI Veteran
St. Jude Donor '09
Quality Motorsports
I recently have had several drivability/starting/rich running problems with my 02 C5 coupe after my cam install. So today the car was tuned by Quality Motorsports in Lewisville, and seriously I could not ask for a better experience. Just to give HUGE thanks to Patrick and the crew there, I will detail everything these guys did for me today. They showed up WAY before opening time to accomodate my work schedule, then listened to all my issues I was having with the car and actually took them to heart. I stated, "the car wont start when its hot, such as I stop at a gas station, fill up, and get just cranking." Well during the tuning, Patrick actually stopped at a gas station, went inside and then came back out to simulate my exact problem, then cured it! Along with other numerous problems with the tune, it was running with a 10.8:1 AFR and was pinging at WOT. They then stayed late for me to pick up the car, explain in great detail everything that was done to the car, had me test drive it to make sure it was perfect before I left, washed it for me AND gave me a price break because of all the drivability problems that ANOTHER shop had caused. Anyone who is wanting to find a tuner/installer, call up Quality Motorsports without a doubt. I cannot thank them enough.
Chris
Chris
#4
Instructor
Member Since: May 2007
Location: Plano Texas
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
Patrick, Luke and everyone I have met there has been nothing but first rate and then some.
You can't ask for a better listener and hands on experience by the owner of the shop cannot be replaced.
I have used then for many mods and NEVER had a problem.
Bill
You can't ask for a better listener and hands on experience by the owner of the shop cannot be replaced.
I have used then for many mods and NEVER had a problem.
Bill
Last edited by BDillon; 03-21-2008 at 12:14 PM.
#5
Le Mans Master
I also agree, top notch people doing top notch work.
#10
Instructor
Member Since: May 2006
Location: Frisco TX
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
#11
Melting Slicks
Thread Starter
Member Since: Mar 2004
Location: Farmers Branch TX
Posts: 3,365
Likes: 0
Received 0 Likes
on
0 Posts
Cruise-In VI Veteran
St. Jude Donor '09
http://www.theair-charger.com
When I emailed them, Carlos replied back within an hour and when I called Patrick he was extremely helpful every time. Everyone I dealt with was great.
When I emailed them, Carlos replied back within an hour and when I called Patrick he was extremely helpful every time. Everyone I dealt with was great.
#13
Racer
#15
Instructor
Member Since: Jan 2006
Location: Sachse Texas
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Hmmmmmm.........very curious about your hot start issue. I have the exact same issue after heads and cam install on my 04 coupe. I took it back multiple times to no avail. I have pm'd you.
#16
I was also having the same problem. Now my 6 month old O2's are bad and turned off till I get a chance to take my car to QM.
#17
Safety Car
Member Since: Oct 2001
Location: Dallas/Valley Ranch TEXAS!!!
Posts: 4,945
Likes: 0
Received 0 Likes
on
0 Posts
Patrick built my creation, and He, Carlos and the Crew get ALL of my business... Quality Motorsports/Vette air is a TOP Notch Shop... From custom fabrication to bolt on's and tuning... They are number one in my book...
#18
Safety Car