Mod party?
Thread Starter
Team Owner
Joined: Jan 2004
Posts: 23,220
Likes: 3
From: HOUSTON
St. Jude Donor '06 thru '15, '19
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
Former Vendor
Joined: Jan 2009
Posts: 12,288
Likes: 23
From: League City Texas
Houston Events Coordinator
St. Jude Donor '11-'12, '14
I believe in the Beer Fairy
Drifting
Joined: Jun 2001
Posts: 1,718
Likes: 13
From: Katy TX
St. Jude Donor '12
Honestly, I don't even have a grill at the house, so if we're going to do a cookout I need to borrow something. Maybe my neighbor has one we can use. Not sure if his is portable or built in. Besides, I'm a lousy cook.
We can always just pick a time to hang out and do a few minor mods. The shifter and brake install will keep a few people busy. If we get bored, I've got a 103" projector tv inside.....
I only have 4 jackstands though. So if we're doing more than one set of mods with cars off the ground, perhaps someone can bring another set. I've got most of the basic hand tools and a simple set of air tools to go with a compressor. If you need something special post it up and we'll see if someone has it.
My weekends are relatively limited but I could do 4/25 or 5/9. Also as an FYI, I'm way west. One exit shy of Brookshire. Yes, that's past the Katy Mills Mall.
And just to entice - here's a shot of the garage. And I'll start picking up some of all that crap laying around.
And here's the first pic I've posted of the completed car. I'll have a whole thread on it next week some time.
chris
Pro
Joined: Apr 2002
Posts: 578
Likes: 1
From: Dallas TX
April 25th would not be good for me either, I leave the country too soon after that...
May 9th, hmmm, Let me ask my better half, it would be nice to get extra hands with brakes, maybe belts, plugs, we'll have to see...
I have a set of stands, 4, but I still don't like them....
I have A LOT of hand tools I could bring, Just a little confined in trunk space or I would volunteer another jack, rhino ramps, etc etc etc
-Ed
May 9th, hmmm, Let me ask my better half, it would be nice to get extra hands with brakes, maybe belts, plugs, we'll have to see...
I have a set of stands, 4, but I still don't like them....
I have A LOT of hand tools I could bring, Just a little confined in trunk space or I would volunteer another jack, rhino ramps, etc etc etc
-Ed
Supporting Tuner
Joined: Sep 2004
Posts: 51,896
Likes: 39
From: ================== Houston, Texas www.englandgreen.com ================== Necessary Evil™ __________
CI 6-7-8-9-10 Veteran
St. Jude Donor '05-'06-'07-'08-'09-'10-'11-'12-'13-'14
Depending on when it is, I'll drop in to eat 