TPS C5 & C6 Powder Coated & 100% Rebuilt Calipers & brackets- FREE SHIPPING!
#41
Supporting Vendor
Thread Starter
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
Good amount of calipers in stock and ready to ship....
C5 Red (2 Sets)
C5 Yellow (1 Set)
C5 & C6 Candy Blue (1 Set each)
C6 Candy Red (1 Set)
C6 Gold (1 Set)
C5 & C6 Black (1 Set each)
C5 Silver (1 Set)
C6 (2 sets no done so can make ANY Color You want)
C5 Red (2 Sets)
C5 Yellow (1 Set)
C5 & C6 Candy Blue (1 Set each)
C6 Candy Red (1 Set)
C6 Gold (1 Set)
C5 & C6 Black (1 Set each)
C5 Silver (1 Set)
C6 (2 sets no done so can make ANY Color You want)
__________________
TPSMotorsports.com
Mike Mak
2705 Lafayette Street
Santa Clara, CA 95050
Phone #: 408/898-4632
Email #: MikeM@TPSMotorsports.com
Authorized dealer of Corbeau Seats, ECS Superchargers, Edelbrock SuperChargers, A&A Superchargers, Kooks, Whipple, Magnalow, Corsa, Borla. LG Motorsports, Procharger, Billy Boat Exhaust, AWE Exhaust, American Racing, TPS Brake Rotors/ Kits, Stainless Steel Brake Lines & much more...Mike Mak
2705 Lafayette Street
Santa Clara, CA 95050
Phone #: 408/898-4632
Email #: MikeM@TPSMotorsports.com
#42
Supporting Vendor
Thread Starter
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
Git rid of those ugly stock calipers and get a set of TPS Motorsports Power Coated & Rebuilt Calipers!
-Lots of colors in stock and ready to ship immediately!
-Lots of colors in stock and ready to ship immediately!
#44
Burning Brakes
TPSMak,
I plan on removing my C6 Z06 calipers and sending them off to be powder coated black this winter (ie: Jan / Feb ish). I have the OEM "CORVETTE" decals in silver to add back on the calipers for the original look. Can I send you both the calipers and decals and have you do the powder coating? If so, how much would this cost, and what would the turn-around time be?
-Roy
I plan on removing my C6 Z06 calipers and sending them off to be powder coated black this winter (ie: Jan / Feb ish). I have the OEM "CORVETTE" decals in silver to add back on the calipers for the original look. Can I send you both the calipers and decals and have you do the powder coating? If so, how much would this cost, and what would the turn-around time be?
-Roy
#45
Supporting Vendor
Thread Starter
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
TPSMak,
I plan on removing my C6 Z06 calipers and sending them off to be powder coated black this winter (ie: Jan / Feb ish). I have the OEM "CORVETTE" decals in silver to add back on the calipers for the original look. Can I send you both the calipers and decals and have you do the powder coating? If so, how much would this cost, and what would the turn-around time be?
-Roy
I plan on removing my C6 Z06 calipers and sending them off to be powder coated black this winter (ie: Jan / Feb ish). I have the OEM "CORVETTE" decals in silver to add back on the calipers for the original look. Can I send you both the calipers and decals and have you do the powder coating? If so, how much would this cost, and what would the turn-around time be?
-Roy
#46
Burning Brakes
Sure you can do that... costs would be $580 which would include stripping of the caliper, rebuilding with new boots and seals, putting new stickers on, and shipping the brakes back to you. If you want us to use our stickers and keep yours as spares the price is $599 shipped to you
#47
Supporting Vendor
Thread Starter
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
http://www.tpsmotorsports.com/corvet...liper-set.html
#48
Supporting Vendor
Thread Starter
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
End of 2015 Special for all Powder Coated Caliper Purchase!
Buy any set of powder coated calipers and we will give you a set of Speed Bleeders for them FREE OF CHARGE!
The old manual way of bleeding your brakes
Bleeding brakes used to be a difficult thing to do in the past. It generally required two people to bleed brakes. You had to have one person pump the brake pedal while you had the mechanic open and close the bleeder screw. You had to coordinate the openings and closings with the pumper. If you didn't coordinate the timing correctly you could end up with more air in the system than when you started.
The new and improved way
Introducing SPEED BLEEDER?, the patented bleeder screw with the built-in check valve. It is truly a one-person bleeder screw. Once installed, it becomes a permanent part of the brake system. When it is time to bleed your brakes, you loosen the Speed Bleeder 1/4 turn and pump your brake pedal. When the pedal is depressed the pressure generated opens the check valve letting air and brake fluid out of the end of the Speed Bleeder. When you release the pedal and it returns to the up position, the check valve closes and prevents any air from reentering the system through the Speed Bleeder. When bubble free fluid is evident you close the Speed Bleeder. In the closed position it works just like your stock bleeder screw and prevents any brake fluid from leaking out. It generally takes about 5 pumps to purge each caliper or wheel cylinder. That is all there is to bleeding your brakes. If at a later date you need to bleed your brakes, the patented thread sealing system makes it easy to open the bleeder screw to perform the bleeding operation. It is made of quality materials and it is economical.
Buy any set of powder coated calipers and we will give you a set of Speed Bleeders for them FREE OF CHARGE!
The old manual way of bleeding your brakes
Bleeding brakes used to be a difficult thing to do in the past. It generally required two people to bleed brakes. You had to have one person pump the brake pedal while you had the mechanic open and close the bleeder screw. You had to coordinate the openings and closings with the pumper. If you didn't coordinate the timing correctly you could end up with more air in the system than when you started.
The new and improved way
Introducing SPEED BLEEDER?, the patented bleeder screw with the built-in check valve. It is truly a one-person bleeder screw. Once installed, it becomes a permanent part of the brake system. When it is time to bleed your brakes, you loosen the Speed Bleeder 1/4 turn and pump your brake pedal. When the pedal is depressed the pressure generated opens the check valve letting air and brake fluid out of the end of the Speed Bleeder. When you release the pedal and it returns to the up position, the check valve closes and prevents any air from reentering the system through the Speed Bleeder. When bubble free fluid is evident you close the Speed Bleeder. In the closed position it works just like your stock bleeder screw and prevents any brake fluid from leaking out. It generally takes about 5 pumps to purge each caliper or wheel cylinder. That is all there is to bleeding your brakes. If at a later date you need to bleed your brakes, the patented thread sealing system makes it easy to open the bleeder screw to perform the bleeding operation. It is made of quality materials and it is economical.
#49
Supporting Vendor
Thread Starter
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
Get a set of Powder Coated Calipers from only $299 now!
Special December Christmas Pricing!
Special December Christmas Pricing!
Bump for our best sale of the year! Everything is on sale!
Click here to place your orders
http://www.tpsmotorsports.com/black-...-corvette.html
0% Financing Available for up to 1 Year on ALL PURCHASES!
#50
Supporting Vendor
Thread Starter
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
Spring is just around the corner!
Git rid of those ugly stock calipers and get a set of TPS Motorsports Power Coated & Rebuilt Calipers!
-Lots of colors in stock and ready to ship immediately!
Git rid of those ugly stock calipers and get a set of TPS Motorsports Power Coated & Rebuilt Calipers!
-Lots of colors in stock and ready to ship immediately!
#51
Supporting Vendor
Thread Starter
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
Lot's of calipers in stock and ready to ship! No waiting for many colors for C5, C6, and C6 Z51! If we have it in stock we'll ship it out to you within 48 hours of placing your order!
Get rid of the the UGLY stock calipers with a set of our Powder Coated and rebuilt calipers! Pick a color we stock OR any color that's available!
Get rid of the the UGLY stock calipers with a set of our Powder Coated and rebuilt calipers! Pick a color we stock OR any color that's available!
#52
Supporting Vendor
Thread Starter
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
Are your stock calipers starting to look UGLY? Do you want to change the color of your Calipers? Get a set of our Powder Coated and rebuilt calipers! Pick a color we stock OR any color that's available!
C6 Z06/ Grandsport available right now for VERY short wait time... set will be done in less than 1.5 weeks.
C6 Z06/ Grandsport available right now for VERY short wait time... set will be done in less than 1.5 weeks.
#53
Supporting Vendor
Thread Starter
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
Get rid of your UGLY stock calipers? Do you want to change the color of your Calipers? Get a set of our Powder Coated and rebuilt calipers! Pick a color we stock OR any color that's available! Lots of colors in stock ready to ship immediately!
C6 Z06/ Grandsport available right immediately. Calipers are available to be done the color of your choice!
MANY COLORS IN STOCK AND READY TO SHIP FOR C5 & C6 CALIPERS!
C6 Z06/ Grandsport available right immediately. Calipers are available to be done the color of your choice!
MANY COLORS IN STOCK AND READY TO SHIP FOR C5 & C6 CALIPERS!
#54
Supporting Vendor
Thread Starter
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
Summer Car Show Season is HERE!
Git rid of those ugly stock calipers and get a set of TPS Motorsports Power Coated & Rebuilt Calipers!
-Lots of colors in stock and ready to ship immediately!
Git rid of those ugly stock calipers and get a set of TPS Motorsports Power Coated & Rebuilt Calipers!
-Lots of colors in stock and ready to ship immediately!
#55
Supporting Vendor
Thread Starter
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
Lot's of calipers in stock and ready to ship! No waiting for many colors for C5, C6, C6 Z51, C6 Z06, and C7! If we have it in stock we'll ship it out to you within 48 hours of placing your order!
Get rid of the the UGLY stock calipers with a set of our Powder Coated and rebuilt calipers! Pick a color we stock OR any color that's available!
Get rid of the the UGLY stock calipers with a set of our Powder Coated and rebuilt calipers! Pick a color we stock OR any color that's available!
#56
Supporting Vendor
Bump for Great Looking Calipers !!
140 Martinvale Lane
San Jose, CA 95119
Phone : 408-898-4632
Email : MikeM@TPSMotorsports.com
CesarT@TPSMotorsports.com
Authorized dealer of Corbeau Seats, ECS Superchargers, Edelbrock SuperChargers, A&A Superchargers, LG Motorsports, Whipple, Vortech, Paxton, Procharger, Billy Boat Exhaust, GHL Exhaust, American Racing, TPS Brake Rotors/ Kits, Stainless Steel Brake Lines & much more..
San Jose, CA 95119
Phone : 408-898-4632
Email : MikeM@TPSMotorsports.com
CesarT@TPSMotorsports.com
Authorized dealer of Corbeau Seats, ECS Superchargers, Edelbrock SuperChargers, A&A Superchargers, LG Motorsports, Whipple, Vortech, Paxton, Procharger, Billy Boat Exhaust, GHL Exhaust, American Racing, TPS Brake Rotors/ Kits, Stainless Steel Brake Lines & much more..