passenger window stop working
Racer
Joined: Mar 2008
Posts: 410
Likes: 0
From: DFW TX
Melting Slicks
Joined: Jun 2008
Posts: 2,283
Likes: 16
From: Katy Tx
hold the button down and at the same time hit it hard with your hand/fist - right at the front of the pull handle. Worked for me almost 3 yrs ago - no trouble since.
Thread Starter
Intermediate
Joined: Dec 2010
Posts: 49
Likes: 0
From: dfw tx
Pro
Joined: Jan 2008
Posts: 597
Likes: 0
From: Tulsa Oklahoma
It's a cable driven unit with the motor mounted just below the lever/unlock switch. Is the motor turning or just clicking? cable could have come off one of the four pulleys. It's a pretty easy task to take out. The glass isn't glued to the regulator assy either.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Racer
Joined: Aug 2002
Posts: 469
Likes: 1
From: Sugar Land Tx
Do a search in C5 section. My old C5 did the same thing and if I remember correctly 
I took off the regulator ( switch module) in the door and cleaned up the contacts to fix it. Not the up & down buttons but the regulator module. I will try to do a search and post
here it is: http://forums.corvetteforum.com/c5-g...-easy-fix.html
I took off the regulator ( switch module) in the door and cleaned up the contacts to fix it. Not the up & down buttons but the regulator module. I will try to do a search and posthere it is: http://forums.corvetteforum.com/c5-g...-easy-fix.html
Last edited by RPHCRMZ51; Mar 10, 2011 at 09:08 PM.
Racer
Joined: Apr 2007
Posts: 408
Likes: 2
From: Naperville, IL
St. Jude Donor '13, '15
Do a search in C5 section. My old C5 did the same thing and if I remember correctly I took off the regulator ( switch module) in the door and cleaned up the contacts to fix it. Not the up & down buttons but the regulator module. I will try to do a search and post
here it is: http://forums.corvetteforum.com/c5-g...-easy-fix.html
I took off the regulator ( switch module) in the door and cleaned up the contacts to fix it. Not the up & down buttons but the regulator module. I will try to do a search and posthere it is: http://forums.corvetteforum.com/c5-g...-easy-fix.html
same thing happen and this fixed it for me!!!
Intermediate
Joined: Jul 2010
Posts: 46
Likes: 0
From: Copan OK
Got the motor and was ready to start project - I thought well first I oughta check the switch since I did not get a click- pulled the switch - pushed connector hard -put light pressure on wires to motor - gave it a try and has been working ever since. I will keep the motor just in case.
