C5 A&A T-trim V3 8-Rib Blower Kit
#1
Melting Slicks
Thread Starter
C5 A&A T-trim V3 8-Rib Blower Kit
I put approximately 10k miles on this kit in the 2 years I had it. It made 751rwhp on my stock shortblock with stock heads. The only part missing here is 1 silicone coupler for the blower inlet available from A&A, ebay, etc. I removed this kit myself, and I made sure to get every single piece. Parts included:
A&A kit with ram air intercooler
T-trim v3 upgrade (self contained)
4 oz oil for blower
All fasteners, etc from kit
LPE 255lph in-tank fuel pump
8-rib tensioner and idler pulleys on bracket
8-rib power steering pulley
8-rib alternator pulley
8-rib idler pulley
Upgrade Tial 50mm BOV
The 8-rib crank dampner is not included, but I will include it for the right price and replace it with a 6-rib for my new turbo setup. I highly recommend going 8-rib from the beginning, but you can run this kit with your stock 6-rib dampner and accessories. I never threw a belt or had a single belt related issue with this kit after initial startup troubleshooting which is not the case for most.
You will need upgraded injectors.
I priced this out on A&A's site and subtracted for the balancer and injectors and came up with $6,100 to purchase this new.
I'm asking $4,500 + shipping obo. Preference will be given to local buyers (Houston, Tx)
A&A kit with ram air intercooler
T-trim v3 upgrade (self contained)
4 oz oil for blower
All fasteners, etc from kit
LPE 255lph in-tank fuel pump
8-rib tensioner and idler pulleys on bracket
8-rib power steering pulley
8-rib alternator pulley
8-rib idler pulley
Upgrade Tial 50mm BOV
The 8-rib crank dampner is not included, but I will include it for the right price and replace it with a 6-rib for my new turbo setup. I highly recommend going 8-rib from the beginning, but you can run this kit with your stock 6-rib dampner and accessories. I never threw a belt or had a single belt related issue with this kit after initial startup troubleshooting which is not the case for most.
You will need upgraded injectors.
I priced this out on A&A's site and subtracted for the balancer and injectors and came up with $6,100 to purchase this new.
I'm asking $4,500 + shipping obo. Preference will be given to local buyers (Houston, Tx)
Last edited by user_name; 11-29-2011 at 10:02 AM.
#3
Melting Slicks
Thread Starter