Tulsa alignment ??
Thread Starter
Melting Slicks
Joined: Nov 2009
Posts: 2,536
Likes: 15
Tulsa alignment ??
Looking for a reputable shop for a 4 wheel alignment on my '04Z. A pit style would be nice.....she is very low...
.
Had both fwd and aft cradles out recently....needs alignment bad...
.
Thanks.....
.Had both fwd and aft cradles out recently....needs alignment bad...
.Thanks.....
Pro
Joined: Jan 2008
Posts: 597
Likes: 0
From: Tulsa Oklahoma
Sam's wheel alignment. He was recommended by a Vette auto xer & chevy svc manager. His lift is recessed into the concrete to allow lowered cars on it easier. Not the best part of town, but he knows his stuff. Who is that in Owasso Johnny?
Advanced
Joined: Aug 2009
Posts: 97
Likes: 1
From: tulsa oklahoma
Sams
I like the Sam idea with the PIT!! Ronnie is an old school guy who has put several of my racecars (c-2 & c-3) right on the specs I wanted.
Let us know how Sam works out I have a C6 that could use some work!
Let us know how Sam works out I have a C6 that could use some work!
Instructor
Joined: Jul 2011
Posts: 126
Likes: 5
From: Broken Arrow Oklahoma
Me too!
Had a guy who use to work at Mikes Discount that was really good and had the "in floor" alinement machine. He kept tweaking even after in showed "within tol". He is no longer there
Heard he might be up north of Tulsa?? Could it be that guy?
Had a guy who use to work at Mikes Discount that was really good and had the "in floor" alinement machine. He kept tweaking even after in showed "within tol". He is no longer there
Heard he might be up north of Tulsa?? Could it be that guy?
Pro
Joined: Jan 2008
Posts: 597
Likes: 0
From: Tulsa Oklahoma
Ok. I've known Ron for years! Definitely an old school rodder. Didn't know he was still doing it.
I's not actually a pit, just sunk the lift into the floor a couple inches so it's easier to drive onto. Then raises up.
Last edited by BrentC5Z; Mar 23, 2012 at 01:29 PM.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Safety Car
Joined: Aug 2000
Posts: 3,510
Likes: 43
From: Tulsa OK
Acme Wheel Alignment...918-587-1014, ask for Greg. It's about 4100 S. Jackson. They have pits and there is no problem getting a lowered car in there, very flat. He has aligned all of my Corvettes and several other cars I have owned.
They are old school, don't use computers. Greg and his son race modified cars, so they understand what they are doing. I would not take my car anyplace else.
They are old school, don't use computers. Greg and his son race modified cars, so they understand what they are doing. I would not take my car anyplace else.
Heel & Toe
Joined: Sep 2013
Posts: 20
Likes: 0
Awesome, thanks for the referral! I rode by Sams today to make sure I knew where he was since I was in the area.
Sounds like it will be Sams or Acme at this point. My car is not lowered so short of having to cross a creek to get to the shop I should be fine. Hah.
Thanks
Adam
Sounds like it will be Sams or Acme at this point. My car is not lowered so short of having to cross a creek to get to the shop I should be fine. Hah.
Thanks
Adam