Best Corvette Tech in El Paso?
10-18-2018, 04:07 AM
#3
Race Director
Rudolph Chevrolet.
There is a solid Corvette guy in there. I just forgot his name. He did my 2000 FRC leaking slave swap and removed the rear cradle assembly as a whole unit. Very knowledgeable and an overall good car guy mechanic. He wouldn't even take my Vette out for a test drive. He called me when it was done and allowed me the initial drive. I opted for a tune up as well and unfortunately, he did not realize I had different spark plugs in there and ordered/installed standard spark plugs even before they were removed that has to be changed out after the engine cooled off for a day. I should have said something but honestly forgot myself.
There is a solid Corvette guy in there. I just forgot his name. He did my 2000 FRC leaking slave swap and removed the rear cradle assembly as a whole unit. Very knowledgeable and an overall good car guy mechanic. He wouldn't even take my Vette out for a test drive. He called me when it was done and allowed me the initial drive. I opted for a tune up as well and unfortunately, he did not realize I had different spark plugs in there and ordered/installed standard spark plugs even before they were removed that has to be changed out after the engine cooled off for a day. I should have said something but honestly forgot myself.
Last edited by WICKEDFRC; 10-18-2018 at 04:26 AM.
10-18-2018, 04:26 AM
#4
Race Director
The mechanic that worked on my 2000 FRC was George "Shannon" Peevey
19155262542
19155262542
10-22-2018, 04:23 PM
#5
Melting Slicks
Hammer Performance. They have the best vette tech in the area.