Testing
Thread Starter
Pro
Joined: Feb 2001
Posts: 509
Likes: 15
From: Calgary, Alberta, Canada
Testing
Corvette Road Test 1 - 2013
Chances are improving with each upgrade to my corvette for the CCCC-WR 2013 racing circuit.
* Corvette 700R4 B&M Drag Racing shift kit with Transpak
* QA1 Single Adjustable Racing Shocks
* Hawk HP+ Drag & Autocrossing Brake Pads
* VanSteel Pro Camber Brace
Racing Parts:
Wheel Testing - No Wheel Adapters:
A photo of the 315-35-17's:
A side view of the wheels:
A close up of the front wheel:
A close up of the rear wheel:
A side view of the passenger side:
A top view of the front wheel:
Wheel Testing - With 3/4" Wheel Adapters:
Modification to Gord's surplus lug nuts:
Comparing the modified lug nut to original lug nut:
Test fitting 3/4" wheel adapter with modified lug nuts:
The original wheel studs extend beyond the wheel adapter:
A different angle of the original wheel studs extending beyond the wheel adapter:
A different angle of the original wheel studs extending beyond the wheel adapter:
A 1/4" spacer was inserted to accommodate the wheel studs:
Photo of wheel mounted on Corvette:
Side view:
Measurement of wheel:
Measurement of wheel:
Measurement of wheel:
Chances are improving with each upgrade to my corvette for the CCCC-WR 2013 racing circuit.
* Corvette 700R4 B&M Drag Racing shift kit with Transpak
* QA1 Single Adjustable Racing Shocks
* Hawk HP+ Drag & Autocrossing Brake Pads
* VanSteel Pro Camber Brace
Racing Parts:
Wheel Testing - No Wheel Adapters:
A photo of the 315-35-17's:
A side view of the wheels:
A close up of the front wheel:
A close up of the rear wheel:
A side view of the passenger side:
A top view of the front wheel:
Wheel Testing - With 3/4" Wheel Adapters:
Modification to Gord's surplus lug nuts:
Comparing the modified lug nut to original lug nut:
Test fitting 3/4" wheel adapter with modified lug nuts:
The original wheel studs extend beyond the wheel adapter:
A different angle of the original wheel studs extending beyond the wheel adapter:
A different angle of the original wheel studs extending beyond the wheel adapter:
A 1/4" spacer was inserted to accommodate the wheel studs:
Photo of wheel mounted on Corvette:
Side view:
Measurement of wheel:
Measurement of wheel:
Measurement of wheel:
Last edited by Magnet; Apr 7, 2013 at 05:38 PM.
