zo6 wheels w/ brake upgrade
11-02-2006, 02:29 PM
#1
4th Gear
Thread Starter
Member Since: Aug 2005
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
zo6 wheels w/ brake upgrade
Sorry if this has already been aswered but I was wondering how much of an offset the wheel has to have to clear the zo6 six piston caliper? I wanted to go with he reproduction zo6 wheel in hyper sliver W/ 18x8.5 in the front and 19x10 in the rear havent figured out tire size yet.
Please Help ,
Mike
Please Help ,
Mike
11-03-2006, 12:24 PM
#2
Former Vendor
offset is not the issues with brake clearance it's wheel design .... many wheels which are the exact same offset and width vary widely when it comes to brake clearance
11-22-2006, 10:16 AM
#3
Le Mans Master
Originally Posted by mike c5
Sorry if this has already been aswered but I was wondering how much of an offset the wheel has to have to clear the zo6 six piston caliper? I wanted to go with he reproduction zo6 wheel in hyper sliver W/ 18x8.5 in the front and 19x10 in the rear havent figured out tire size yet.
Please Help ,
Mike
Please Help ,
Mike
TRR
11-25-2006, 10:51 AM
#4
Le Mans Master
Member Since: Mar 2002
Location: Mississauga, Ontario Corvettes were built to be driven...not trailered
Posts: 5,300
Likes: 0
Received 2 Likes
on
1 Post
St Jude Donor '07-'08-'09
I just went through that a couple of months back...thought you might find this thread helpful...
http://forums.corvetteforum.com/show....php?t=1512629
http://forums.corvetteforum.com/show....php?t=1512629