FS: BBS E88 - Daytona Prototype
Thread Starter
Intermediate
Joined: Dec 2011
Posts: 33
Likes: 0
FS: BBS E88 - Daytona Prototype
18x12.5/18x13
From corvette Daytona prototype raced in rolex.
Killer set for a brave individual that wants something unique.
These cost over $8000 new.
Centerlock hubs can be engineered or you can have holes drilled for lugs.
Halves can be purchased through BBS to make your spec.
$2500 shipped for all four
$1800 shipped for just centers
From corvette Daytona prototype raced in rolex.
Killer set for a brave individual that wants something unique.
These cost over $8000 new.
Centerlock hubs can be engineered or you can have holes drilled for lugs.
Halves can be purchased through BBS to make your spec.
$2500 shipped for all four
$1800 shipped for just centers
Racer
Joined: Nov 2014
Posts: 286
Likes: 12
From: Cypress TX
Thread Starter
Intermediate
Joined: Dec 2011
Posts: 33
Likes: 0
The 1" lips have since sold from this e88 set, so I can part centers or sell whole set for whoever is interested.
- Ian
Thread Starter
Intermediate
Joined: Dec 2011
Posts: 33
Likes: 0
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski