[C2] Need quick info on L71 belt numbers
Thread Starter
Safety Car
Joined: Mar 2000
Posts: 3,543
Likes: 448
From: Central Pennsylvania
Need quick info on L71 belt numbers
Looking for all correct replacement belt part numbers (preferably AC Delco) for a ‘67 L71 car….with power steering. Getting conflicting info from different vendor webpages.
Team Owner
Joined: Feb 2003
Posts: 54,105
Likes: 9,419
From: Sitting in his Nowhere land Hanover Pa
2024 C2 of the Year Finalist - Unmodified
2015 C2 of Year Finalist
Quanta products who supply the "correct" style belts often makes two correct length belts for repro and original pulley configurations.
Race Director
Joined: Apr 2005
Posts: 11,274
Likes: 2,136
From: Bowling Green, Kentucky
What do the old belts say regarding their size/length?? Should be marked.......... or NAPA or others should have a belt sizing tool that can measure the old belts. Worst case is no belts to measure. Then buy a cheap one from hardware store that is longer than needed. Cut it. Wrap around the pulleys and mark where the ends overlap. Measure the length. That is your size. Make sure you also have the correct width to go along with the length.
Or you can check the Chevrolet Parts Manuals to gets what sizes GM recommends. They may or may not fit depending on if you have engine/pulley revisions from OEM.
Larry
Or you can check the Chevrolet Parts Manuals to gets what sizes GM recommends. They may or may not fit depending on if you have engine/pulley revisions from OEM.
Larry
