07 Z06 shifter rattle
Thread Starter
Advanced
Joined: Dec 2025
Posts: 54
Likes: 7
From: Walpole, Massachusetts
07 Z06 shifter rattle
Hello all,
hope your well. My 07 Z06 has a completely rebuilt driveline (motor, clutch, tt, tranny, etc.) it also has an aftermarket shifter.
I noticed when accelerating to a high rpm (3.5-5.0) the shifter likes to rattle back and forth pretty quick. It’s a slight movement back to forth and it lessens when I put my hand on it.
I have a 2015 Z28 with the ls7 and tr6060, and although it’s a different tranny, it’s completely smooth, but a stock shifter. They both have around 30k
what would cause this?
Thanks
hope your well. My 07 Z06 has a completely rebuilt driveline (motor, clutch, tt, tranny, etc.) it also has an aftermarket shifter.
I noticed when accelerating to a high rpm (3.5-5.0) the shifter likes to rattle back and forth pretty quick. It’s a slight movement back to forth and it lessens when I put my hand on it.
I have a 2015 Z28 with the ls7 and tr6060, and although it’s a different tranny, it’s completely smooth, but a stock shifter. They both have around 30k
what would cause this?
Thanks
Le Mans Master
Joined: Dec 2004
Posts: 5,493
Likes: 809
From: West coast CA
Hello all,
hope your well. My 07 Z06 has a completely rebuilt driveline (motor, clutch, tt, tranny, etc.) it also has an aftermarket shifter.
I noticed when accelerating to a high rpm (3.5-5.0) the shifter likes to rattle back and forth pretty quick. It’s a slight movement back to forth and it lessens when I put my hand on it.
I have a 2015 Z28 with the ls7 and tr6060, and although it’s a different tranny, it’s completely smooth, but a stock shifter. They both have around 30k
what would cause this?
Thanks
hope your well. My 07 Z06 has a completely rebuilt driveline (motor, clutch, tt, tranny, etc.) it also has an aftermarket shifter.
I noticed when accelerating to a high rpm (3.5-5.0) the shifter likes to rattle back and forth pretty quick. It’s a slight movement back to forth and it lessens when I put my hand on it.
I have a 2015 Z28 with the ls7 and tr6060, and although it’s a different tranny, it’s completely smooth, but a stock shifter. They both have around 30k
what would cause this?
Thanks
Le Mans Master
Joined: Jan 2001
Posts: 6,450
Likes: 371
From: Maryville TN
St. Jude Donor '06-13,'16-'17, '19
Tom
