CorvetteForum - Chevrolet Corvette Forum Discussion
Share Your Pictures with Our Community. Upload Now
0 2026/04/01 02:43:52
0 2026/04/01 02:39:07
0 2026/04/01 02:38:57
0 2026/04/01 02:38:50
0 2026/04/01 02:38:42
0 2026/04/01 02:22:18
0 2026/04/01 02:22:12
0 2026/04/01 01:47:31
0 2026/04/01 01:46:26
0 2026/04/01 00:52:11
0 2026/04/01 00:50:50
0 2026/04/01 00:48:15
Advertisement
0 2026/04/01 00:42:08
0 2026/04/01 00:42:07
0 2026/04/01 00:42:05
0 2026/04/01 00:42:04
0 2026/04/01 00:00:45
0 2026/03/31 23:56:41
0 2026/03/31 23:48:27
0 2026/03/31 23:47:47
0 2026/03/31 23:42:58
One final issue I've seen was the wheel weights hittin on this part of the UCA (see the tiny witness mark). I moved the weights further into the wheel, and also grinded that area a tiny bit to create more clearance.
One final issue I've seen was the wheel weights hittin on this part of the UCA (see the tiny witness mark). I moved the weights further into the wheel, and also grinded that area a tiny bit to create more clearance.
0 2026/03/31 23:08:45
0 2026/03/31 23:06:12
Oops, it turns out I forgot to tighten this : ( I am thinking it would impact alignment more than anything since LCA maniuplates hub angles, but not completely sure...
Oops, it turns out I forgot to tighten this : ( I am thinking it would impact alignment more than anything since LCA maniuplates hub angles, but not completely sure...
0 2026/03/31 23:06:10
0 2026/03/31 23:05:52
I initially removed the sway bars to see if I can clock them, but it was clearly not possible.
I initially removed the sway bars to see if I can clock them, but it was clearly not possible.
0 2026/03/31 22:56:14
This bushing is not meant to be opened up or moved around; it doesn't budge. That said, those big gaps on each side give you the clue on how it works. When the mount is loose, the allow the sway bar to clock and settle. Once you tighten the mounts, those gaps are compressed, and the sway bar no longer wants to play along.
This bushing is not meant to be opened up or moved around; it doesn't budge. That said, those big gaps on each side give you the clue on how it works. When the mount is loose, the allow the sway bar to clock and settle. Once you tighten the mounts, those gaps are compressed, and the sway bar no longer wants to play along.
0 2026/03/31 22:56:10
So, just leave the mounts a bit loose,and only tighten them when the car is on the ground to achieve the right angles and no unnecessary load.
So, just leave the mounts a bit loose,and only tighten them when the car is on the ground to achieve the right angles and no unnecessary load.
0 2026/03/31 22:56:07
0 2026/03/31 22:39:01
0 2026/03/31 22:38:55
0 2026/03/31 22:38:45
0 2026/03/31 22:24:45
Advertisement