CorvetteForum - Chevrolet Corvette Forum Discussion
AFS 17X11 "ZR-1" 50mm offset with GM Part #22551491 Long Wheel Studs
AFS 17X11 "ZR-1" 50mm offset with GM Part #22551491 Long Wheel Studs
0 2008/08/07 04:54:28
"Big Doggie" Rear Spindle Narrowing Mod
"Big Doggie" Rear Spindle Narrowing Mod
0 2008/08/07 04:56:07
17X11 "ZR-1" with 315/35ZR/17 Goodyear Eagle F1 GS-D3
17X11 "ZR-1" with 315/35ZR/17 Goodyear Eagle F1 GS-D3
0 2008/08/07 04:56:07
LT1 Badge
LT1 Badge
0 2008/10/20 02:22:54
LT1 Mods: LT4 Heads,1.6 Roller Rockers, GMPP "Hot Cam",SLP Shorty Headers, K&N open air, TB bypass, Meziere WP, PCM For Less
LT1 Mods: LT4 Heads,1.6 Roller Rockers, GMPP "Hot Cam",SLP Shorty Headers, K&N open air, TB bypass, Meziere WP, PCM For Less
0 2008/10/20 02:22:54
Modified CNC Master Cylinders (SERIES 701) 13/16" BORE Mcleod Rebuild kit 139065 Wheel Cylinder Cup, NAPA p/n 12400
Modified CNC Master Cylinders (SERIES 701) 13/16" BORE Mcleod Rebuild kit 139065 Wheel Cylinder Cup, NAPA p/n 12400
0 2008/11/13 02:48:27
McLeod Clutch master cylinder (Internals, spring, piston cup)
McLeod Clutch master cylinder (Internals, spring, piston cup)
0 2008/11/13 02:48:27
McLeod Clutch master cylinder (Piston, boot, clip, and arm)
McLeod Clutch master cylinder (Piston, boot, clip, and arm)
0 2008/11/13 02:48:27
93 Bright Aqua Metalic/ Black Interior
93 Bright Aqua Metalic/ Black Interior
0 2008/11/14 03:40:52
93 Bright Aqua Metalic/ Black Interior
93 Bright Aqua Metalic/ Black Interior
0 2008/11/14 03:40:52
93 Bright Aqua Metalic/ Black Interior
93 Bright Aqua Metalic/ Black Interior
0 2008/11/14 03:40:52
Good old days at Hawaii Raceway park
Good old days at Hawaii Raceway park
0 2008/11/22 00:33:22
Good old days at Hawaii Raceway park
Good old days at Hawaii Raceway park
0 2008/11/22 00:33:22
C5 Z06 Front brake upgrade
C5 Z06 Front brake upgrade
0 2008/11/22 00:33:22
8K Instrument cluster
8K Instrument cluster
0 2009/01/07 13:18:35
1993 C4 Corvette Bright Aqua Metallic LT1/ ZF6
1993 C4 Corvette Bright Aqua Metallic LT1/ ZF6
0 2009/05/04 22:08:43
Venting a 92-94 OPTI. 4- 3/16X3/16x1/8 t-fitting, 1- 3/16 Vacuum cap, Vacuum line, Dremel, drill bit, sealant. Use the dremel at high speed to open a hole in the cap. Use a dremel or drill to open up the vent holes. I used 3M 5200 sealant http://www.corvettefever.com/howto/16758/index.html
Venting a 92-94 OPTI. 4- 3/16X3/16x1/8 t-fitting, 1- 3/16 Vacuum cap, Vacuum line, Dremel, drill bit, sealant. Use the dremel at high speed to open a hole in the cap. Use a dremel or drill to open up the vent holes. I used 3M 5200 sealant http://www.corvettefever.com/howto/16758/index.html
0 2009/07/10 18:06:30
Inside view of Opti cap with air mod.
Inside view of Opti cap with air mod.
0 2009/07/17 00:52:14
MSD Cap and Rotor kit. p/n 8481 Kit allows 92-94 Opti to be vented. Cap looks very well built and comes with vacuum attach point, and vacuum line
MSD Cap and Rotor kit. p/n 8481 Kit allows 92-94 Opti to be vented. Cap looks very well built and comes with vacuum attach point, and vacuum line
0 2009/07/23 18:35:28
Kit also includes a rotor that is well built, and better piece than than the stock GM rotor. The new vent point is molded on the isolation plate, and includes a vent line. Only mod required to the stock opti is to seal the three vent holes on the bottom with silicone sealer.
Kit also includes a rotor that is well built, and better piece than than the stock GM rotor. The new vent point is molded on the isolation plate, and includes a vent line. Only mod required to the stock opti is to seal the three vent holes on the bottom with silicone sealer.
0 2009/07/23 18:35:28