CorvetteForum - Chevrolet Corvette Forum Discussion
  • LOG IN
  • REGISTER
  • Forums
    • New Member
      • Intros
    • In Memoriam
      • In loving memory of lost CorvetteForum Brothers and Sisters
    • C8 Corvette
      • C8 Stingray/General Discussion
      • C8 Z06 Discussion
      • C8 Grand Sport Discussion
      • C8 ZR1 Discussion
      • C8 ERay/GSX/ZR1X
      • C8 Tech/Performance
      • C8 Forced Induction/Nitrous
      • C8 Corvettes for Sale
      • C8 Parts for Sale/Wanted
      • C8 Dealer Inventory
      • C8 Vendor for Sale
    • C7 Corvette, 2014 - 2019
      • C7 General Discussion
      • C7 Z06 Discussion
      • C7 ZR1 Discussion
      • C7 Tech/Performance
      • C7 Forced Induction/Nitrous
      • C7 Dealer Inventory
      • C7 Corvettes for Sale
      • C7 Parts for Sale/Wanted
      • C7 Vendor for Sale
    • C6 Corvette, 2005 - 2013
      • C6 Corvette General Discussion
      • C6 Corvette ZR1 & Z06
      • C6 Tech/Performance
      • C6 Scan & Tune
      • C6 Forced Induction/Nitrous
      • C6 Dealer Inventory
      • C6 Corvettes for Sale
      • C6 Parts for Sale/Wanted
      • C6 Vendor for Sale
    • C5 Corvettes, 1997 - 2004
      • C5 General
      • C5 Tech
      • C5 Scan & Tune
      • C5 Forced Induction/Nitrous
      • Performance Results
      • C5 Corvettes for Sale
      • C5 Parts for Sale/Wanted
      • C5 Vendor for Sale
    • C4 Corvettes, 1984 - 1996
      • C4 General Discussion
      • C4 Tech/Performance
      • C4 ZR-1 Discussion
      • C4s for Sale/Wanted
      • C4 Parts for Sale/Wanted
      • C4 Vendor for Sale
    • C3 Corvettes, 1968 - 1982
      • C3 General
      • C3 Tech/Performance
      • C3s for Sale/Wanted
      • C3 Parts for Sale/Wanted
      • C3 Vendor for Sale
    • C1 & C2 Corvettes, 1953 - 1967
      • C1 & C2 Corvettes
      • C1 & C2 Corvettes for Sale/Wanted
      • C1 & C2 Parts
      • C1 & C2 Vendor for Sale
    • General Corvette Topics
      • Autocrossing & Roadracing
      • Drag Racing
      • Wheels & Tires
      • Car Care Discussion
      • Audio/Electronics
      • Engine Mods
      • Factory Correct Resto
      • Paint/Body
      • Auto Extras & Memorabilia
    • Upcoming Events and Regional Discussion
      • National Events
      • NMCA C4/C5/C6 Shootout
      • Northeast
      • Southeast
      • Great Lakes
      • Northern California
      • Southern California
      • Pacific Northwest
      • Southwest
      • Mountain - Prairie
      • Canadian Events
      • Other Country Events
    • Off Topic
      • Photography
      • F-Body General Discussion
      • Other Cars
    • Professional News, Articles, and Tips
      • Ask Tadge
      • Ken's Newsletters
      • CorvetteForum Newsletter Archive
    • Help & Feedback
      • Help Forum
      • Forum Guidelines and Rules
      • Transactions Feedback
      • Testing
  • News
  • Marketplace
    • Vendor Directory
    • Become a Vendor
    • CorvetteForum Store
  • Tools
    • Car Payment Calculator
    • Tire Rim Calculator
    • Vin Decoder
    • Recalls
    • Technical Service Bulletins (TSBs)
    • Members List
    • Live Feed
  • New Posts
  • How-Tos
  • Gallery
  • View Dark Mode
    • Please register or login to enable Dark Mode.
  • Log In
  • Register
CorvetteForum - Chevrolet Corvette Forum Discussion
    • Threads
      • Advanced
Dark Mode

Please register or login to enable Dark Mode.

Log In

Forgot your Password?

By logging into your account, you agree to our Terms of Use and Privacy Policy, and to the use of cookies as described therein.
or
 
  • Recent
  • Commented
  • Albums
  • My Pictures

My Post Pictures

JerryU
June 17, 2014
 17410
 0
Sort:
Default
  • Default
  • Most Recent
0 2017/12/10 03:40:52 JerryU
Mag Shock Sensor and Thin Arm
Mag Shock Sensor and Thin Arm
0 2014/08/08 08:16:08 JerryU
Tether for Sticky Mount
Tether for Sticky Mount
0 2014/08/10 12:50:15 JerryU
Red and Blue Lights Blocked With Black Tape and Hole Punch!
Red and Blue Lights Blocked With Black Tape and Hole Punch!
0 2014/09/15 06:30:40 JerryU
For a Show Car driven few miles/year who cares about the trans?
For a Show Car driven few miles/year who cares about the trans?
0 2014/09/22 10:25:52 JerryU
Paint Removed Before Installing Plastic FANG
Paint Removed Before Installing Plastic FANG
0 2014/09/25 21:55:48 JerryU
0 2014/10/15 12:20:41 JerryU
"50 Olds Engine, Bored 1/8 inches for "55 Olds Pistons
"50 Olds Engine, Bored 1/8 inches for "55 Olds Pistons
0 2014/10/20 06:35:18 JerryU
'41 Ford Opera Coupe built in High School with '50 Olds Engine Bored 1/8 inchs for '55 Olds Pistons
'41 Ford Opera Coupe built in High School with '50 Olds Engine Bored 1/8 inchs for '55 Olds Pistons
0 2014/10/20 06:37:40 JerryU
From 2007 Owner's Manual for Z06
From 2007 Owner's Manual for Z06
0 2014/10/31 06:50:04 JerryU
Small Sensors with Mag Shock System
Small Sensors with Mag Shock System
0 2014/12/12 08:00:27 JerryU
Z51 Brake Pad Replacement
Z51 Brake Pad Replacement
0 2014/12/17 10:07:07 JerryU
'34 Street Rod Wired from Scratch
'34 Street Rod Wired from Scratch
0 2015/01/01 07:33:57 JerryU
Now that's tucking the tires in the fender wells!
Now that's tucking the tires in the fender wells!
0 2015/01/23 07:46:39 JerryU
Vibration Damper Made From Thin Stainless Fishing Leader and Very Small Eye Hook
Vibration Damper Made From Thin Stainless Fishing Leader and Very Small Eye Hook
0 2015/02/04 23:43:39 JerryU
The Headliner Matches the Flame Motif
The Headliner Matches the Flame Motif
0 2015/02/05 10:12:46 JerryU
He Made the Arm Rests Into Flames
He Made the Arm Rests Into Flames
0 2015/02/05 10:13:00 JerryU
On Z51 Passenger vent is Functional and Brings Air to Differential Cooler.
On Z51 Passenger vent is Functional and Brings Air to Differential Cooler.
0 2015/02/15 09:36:00 JerryU
Made This Alarm for ~$25!  
Warns if the passenger mirror is within 2 inches of the door frame.  Useful when backing out at night.
Made This Alarm for ~$25! Warns if the passenger mirror is within 2 inches of the door frame. Useful when backing out at night.
0 2015/03/01 06:32:14 JerryU
Red Circle, PCV
Red Circle, PCV
0 2015/03/03 11:41:39 JerryU
Pic left is port injection, in 2013 and prior Vettes and on the left what can happen when no gas passes over the valves!  May take a while but the same PCV blow-by is coming from the crankcase!
Pic left is port injection, in 2013 and prior Vettes and on the left what can happen when no gas passes over the valves! May take a while but the same PCV blow-by is coming from the crankcase!
0 2015/03/29 08:45:34 JerryU
Put plastic FANGS on my 2014 C7 and the Grand Sport.  Hit them twice going into a mall in the C7 and no damage.
Put plastic FANGS on my 2014 C7 and the Grand Sport. Hit them twice going into a mall in the C7 and no damage.
0 2015/04/07 21:52:23 JerryU
Simple Alarm Built For ~$20
Simple Alarm Built For ~$20
0 2015/04/13 07:02:23 JerryU
This Video is no Help if You Have an Air Tight Vette!
This Video is no Help if You Have an Air Tight Vette!
0 2015/04/26 16:00:20 JerryU
C6 Switch Added To Bypass Fuse When Desired.
C6 Switch Added To Bypass Fuse When Desired.
0 2015/04/27 21:40:44 JerryU
Internal Wood Partitions Assembled in Fold Flat Nylon Carrier
Internal Wood Partitions Assembled in Fold Flat Nylon Carrier
0 2015/04/30 17:40:09 JerryU
Floor in 2000.  Lowes commercial 1/8 inch thick tile.  Just cleaned floor with soap and water and used a high quality adhesive.
Floor in 2000. Lowes commercial 1/8 inch thick tile. Just cleaned floor with soap and water and used a high quality adhesive.
0 2015/05/03 06:13:32 JerryU
This is the floor ~14 years after floor was installed and where my street rod was parked for years in the center garage.  You can see some stains from hot rubber.  This is a functional garage.  Use standard floor cleaning materials about once every one to two years.  Just sweep or use my leaf blower periodically.  Good enough for my needs.
This is the floor ~14 years after floor was installed and where my street rod was parked for years in the center garage. You can see some stains from hot rubber. This is a functional garage. Use standard floor cleaning materials about once every one to two years. Just sweep or use my leaf blower periodically. Good enough for my needs.
0 2015/05/03 06:13:43 JerryU
Panels behind the seat are stuctural
Panels behind the seat are stuctural
0 2015/05/10 21:59:10 JerryU
Local Chevy Dealer Matched Adveritised Price from a Discount House in a Magazine
Local Chevy Dealer Matched Adveritised Price from a Discount House in a Magazine
0 2015/05/14 04:42:04 JerryU
Trans Cooling Radiator behind Rear Fender
Trans Cooling Radiator behind Rear Fender
0 2015/05/17 12:41:53 JerryU
Bottle Fit Tight, but Insert Tilted Upon a Fast Stop-Water All Over!
Bottle Fit Tight, but Insert Tilted Upon a Fast Stop-Water All Over!
0 2015/05/20 11:47:23 JerryU
Dry Sump Tanks.  Transfer Tube with Oil/Air Separator Seal.  Air "Burps" From Top of Tank and Oil Delivers to Engine From Bottm
Dry Sump Tanks. Transfer Tube with Oil/Air Separator Seal. Air "Burps" From Top of Tank and Oil Delivers to Engine From Bottm
0 2015/05/24 21:16:04 JerryU
There is a small gap between the rocker panel and the aluminum frame.  I inserted a scrape piece of metal in the gap when I drilled so I didn't hit the frame.  Although, as recommended, I moved the rivet to the outside to have a tight fit (which I do) it is still at the bottom of the rocker panel.
There is a small gap between the rocker panel and the aluminum frame. I inserted a scrape piece of metal in the gap when I drilled so I didn't hit the frame. Although, as recommended, I moved the rivet to the outside to have a tight fit (which I do) it is still at the bottom of the rocker panel.
0 2015/07/03 09:43:22 JerryU
Warning on Jack Stand.  Use only for one end.
Warning on Jack Stand. Use only for one end.
0 2015/07/13 07:43:57 JerryU
When spending a month or more under the Street Rod during construction, worth the effort.  But took a multi-step jacking approach with jack stands holding at one level while each end was then raised to insert 12 inch high stanchions.
When spending a month or more under the Street Rod during construction, worth the effort. But took a multi-step jacking approach with jack stands holding at one level while each end was then raised to insert 12 inch high stanchions.
0 2015/07/13 08:57:13 JerryU
Checking splitter clearance in driveway.  Flexible Air Dam is he lowest point by several inches.
Checking splitter clearance in driveway. Flexible Air Dam is he lowest point by several inches.
0 2015/08/07 04:53:31 JerryU
From the 2014 Service Manual
From the 2014 Service Manual
0 2015/08/10 15:29:14 JerryU
Aerogel
Aerogel
0 2015/08/16 17:28:37 JerryU
C6 One Piece Side Rail vs C7 Many Pieces with Crushable Front and Rear Sections
C6 One Piece Side Rail vs C7 Many Pieces with Crushable Front and Rear Sections
0 2015/08/19 08:25:24 JerryU
First
Page
1 of 436
Last
Go To
Page
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • ...
  • 436
1 of 436
Go To GO
Go to page of 436 pages
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • ...
  • 436

Top
CorvetteForum - Chevrolet Corvette Forum Discussion
  • Contact Us
  • FAQ
  • Archive
  • Advertising
  • Cookie Policy
  • Privacy Statement
  • Terms of Service
  • About Us
  • Your Privacy Choices
  • Manage Preferences

© 2026 MH Sub I, LLC dba Internet Brands

Follow Us        



When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.