CorvetteForum - Chevrolet Corvette Forum Discussion
0 2019/11/21 03:23:16
0 2019/11/21 03:23:48
Here you go! The point of the screw just reaches to 7/16", looks like a "D" on the head, not sure on thread size, but course and the same as the screws that hold your window regulator cover on below the inner door handle! Hope this helps!
Here you go! The point of the screw just reaches to 7/16", looks like a "D" on the head, not sure on thread size, but course and the same as the screws that hold your window regulator cover on below the inner door handle! Hope this helps!
0 2019/11/21 03:24:11
0 2019/12/02 04:06:35
0 2019/12/02 04:07:07
0 2019/12/02 04:07:30
0 2019/12/02 04:07:54
0 2019/12/02 04:08:15
0 2019/12/16 20:20:42
0 2019/12/20 03:44:21
Linkage extended, broken spring
Linkage extended, broken spring
0 2019/12/20 03:45:03
Broken spring
Broken spring
0 2019/12/20 03:45:57
Good spring
Good spring
0 2019/12/20 03:47:11
Handle depressed, spring working
Handle depressed, spring working
0 2019/12/20 03:47:42
This is the very front of the passenger fender. You'll notice the larger brace has an ear on it, this ties into the bracket that goes to vacuum tank/frame extension....it also serves as a backing plate for mounting the front bumper cover, so the nuts used to bolt the front cover down don't pull through the fiberglass....as well as stiffening the leading edge of the fender! The small one, bolts to the larger one and also is rivited to the top brace that runs along the top inside edge of the nose!
This is the very front of the passenger fender. You'll notice the larger brace has an ear on it, this ties into the bracket that goes to vacuum tank/frame extension....it also serves as a backing plate for mounting the front bumper cover, so the nuts used to bolt the front cover down don't pull through the fiberglass....as well as stiffening the leading edge of the fender! The small one, bolts to the larger one and also is rivited to the top brace that runs along the top inside edge of the nose!
0 2020/01/22 03:28:49
0 2020/01/28 03:32:51
Blade is 1/2" wide and 1"long
Blade is 1/2" wide and 1"long
0 2020/02/01 05:15:27
0 2020/02/01 05:16:53
0 2020/02/01 05:17:21
0 2020/02/01 05:18:41
0 2020/02/01 05:19:29
0 2020/02/17 16:22:22
0 2020/02/22 04:03:02
0 2020/02/22 04:03:59
0 2020/02/22 04:05:30
0 2020/02/22 04:06:30
0 2020/02/22 04:30:24
0 2020/03/24 19:18:16
0 2020/03/24 19:21:58
0 2020/03/24 19:24:00
0 2020/03/24 19:25:28
0 2020/03/24 19:28:10
0 2020/03/25 16:39:59
0 2020/03/25 16:44:20
0 2020/03/25 16:45:27
0 2020/04/21 03:43:21
0 2020/04/21 03:44:06
0 2020/04/21 03:44:32
0 2020/04/21 03:45:00
0 2020/04/21 03:45:26