CorvetteForum - Chevrolet Corvette Forum Discussion
0 2015/01/04 11:54:42
0 2016/03/14 14:58:28
0 2016/03/14 14:58:30
Ready to tear into it.
Ready to tear into it.
0 2017/06/10 10:04:17
Repaired firewall sectioned in from near Master Cyl mount on drivers side to just shy of the A/C box mount on Pass side
Repaired firewall sectioned in from near Master Cyl mount on drivers side to just shy of the A/C box mount on Pass side
0 2017/06/10 10:20:38
Drivers side Rear spring - moved forward
Drivers side Rear spring - moved forward
0 2017/06/10 10:28:11
Pass side shifted opposite
Pass side shifted opposite
0 2017/06/10 10:28:44
0 2017/06/10 10:38:06
These guys built nests everywhere in this car!
These guys built nests everywhere in this car!
0 2017/06/18 08:45:55
More really old mud dauber nests!! All bolts are in place and looks secure -
More really old mud dauber nests!! All bolts are in place and looks secure -
0 2017/06/18 08:54:08
leaves are shifted back on right
leaves are shifted back on right
0 2017/06/18 08:54:38
Moved forward on the left
Moved forward on the left
0 2017/06/18 08:55:09
2 post
2 post
0 2017/06/18 09:19:54
4 post
4 post
0 2017/06/18 09:21:26
seems like no room here to position the arm on the sill
seems like no room here to position the arm on the sill
0 2017/06/18 09:25:32
same here - realize I don't have the car/post perhaps completely positioned but there's a razor thin margin here right?
same here - realize I don't have the car/post perhaps completely positioned but there's a razor thin margin here right?
0 2017/06/18 09:26:01
Caption from book says "the pads should be placed directly on the steel channel on the birdcage that runs beneath each door"
Caption from book says "the pads should be placed directly on the steel channel on the birdcage that runs beneath each door"
0 2017/06/18 09:28:37
This guy in the C2 forum claims he's done this off and on method more times than he count and calls it the easiest way
This guy in the C2 forum claims he's done this off and on method more times than he count and calls it the easiest way
0 2017/06/18 09:29:39
Close up
Close up
0 2017/06/18 09:30:20
0 2017/06/18 09:32:58
The caption accompanying this photo says "the pads should be placed directly on the steel channel of the birdcage that runs beneath each door."
The caption accompanying this photo says "the pads should be placed directly on the steel channel of the birdcage that runs beneath each door."
0 2017/06/18 09:34:40
On the C2 section, this poster stated he's done body off and on using a 2 post on more cars this way then he can recall
On the C2 section, this poster stated he's done body off and on using a 2 post on more cars this way then he can recall
0 2017/06/18 09:35:44
close up of the mounting
close up of the mounting
0 2017/06/18 09:36:24
Accompanying this photo in Walt's book it says "the pads should be placed directly one the steel channel of the bird cage that runs beneath each door"
Accompanying this photo in Walt's book it says "the pads should be placed directly one the steel channel of the bird cage that runs beneath each door"
0 2017/06/18 09:39:39
A C2 Forum poster added this and said he has used 2 posts more times than he can count to place and remove the body
A C2 Forum poster added this and said he has used 2 posts more times than he can count to place and remove the body
0 2017/06/18 09:40:41
Close up of his photo
Close up of his photo
0 2017/06/18 09:41:22
Body doily built and ready to go
Body doily built and ready to go
0 2018/03/26 16:27:30
0 2019/03/03 09:22:39
0 2019/03/03 09:22:43
0 2019/03/03 10:05:07
0 2019/03/03 10:05:11
0 2019/05/04 10:41:09
0 2019/05/04 10:41:15
0 2019/05/04 10:41:20
0 2019/05/04 10:41:26
0 2019/05/04 10:41:31
0 2019/05/04 10:41:37
0 2019/05/04 10:41:42
0 2019/05/04 10:41:47
0 2019/05/04 10:41:53