CorvetteForum - Chevrolet Corvette Forum Discussion
My second corvette. 1977 stock.
My second corvette. 1977 stock.
0 2020/10/09 05:49:10
My current corvette. 1974 convertible. If they made a 77 convertible I would probably have bought that one in orange.
My current corvette. 1974 convertible. If they made a 77 convertible I would probably have bought that one in orange.
0 2020/10/09 05:49:15
Transport Dolly On a Four Post Lift
Transport Dolly On a Four Post Lift
0 2020/10/13 05:10:57
Transport Dolly Used for Transporting Body.
Transport Dolly Used for Transporting Body.
0 2020/10/13 05:11:28
Gantry with two cranes, one for each side.
Gantry with two cranes, one for each side.
0 2020/10/13 05:15:26
Eliminate the two cross members shown here with arrows; and increase height of the eight risers putting the car body further in the air and you might just be able to clean underneath much easier. Just a thought.
Eliminate the two cross members shown here with arrows; and increase height of the eight risers putting the car body further in the air and you might just be able to clean underneath much easier. Just a thought.
0 2020/10/13 20:15:02
No substitute for a rotisserie though, that made the job much easier.
No substitute for a rotisserie though, that made the job much easier.
0 2020/10/13 20:18:13
0 2020/10/13 20:22:03
0 2020/10/13 20:22:11
0 2020/10/18 03:57:32
1974 frame sitting on top of a 1980 rolling chassis.
1974 frame sitting on top of a 1980 rolling chassis.
0 2020/10/18 04:05:04
1980 rolling chassis with an automatic transmission cross member shown.
1980 rolling chassis with an automatic transmission cross member shown.
0 2020/10/18 04:05:44
1976 rolling chassis with an automatic transmission cross member shown.
1976 rolling chassis with an automatic transmission cross member shown.
0 2020/10/18 04:07:02
0 2020/10/19 04:52:40
0 2020/10/19 04:53:40
0 2020/10/19 04:55:39
1980 rolling chassis with a 1974 manual frame on top.
1980 rolling chassis with a 1974 manual frame on top.
0 2020/10/19 04:56:42
0 2020/10/19 04:56:54
0 2020/10/19 05:00:44
0 2020/10/19 05:04:41
0 2020/10/19 05:08:16
0 2020/10/19 05:08:25
0 2020/10/19 05:08:46
0 2020/10/20 08:22:48
0 2020/10/20 08:23:11
0 2020/10/22 04:11:11
0 2020/10/22 04:11:31
0 2020/10/22 04:11:52
0 2020/10/22 04:12:11
0 2020/10/22 04:12:39
0 2020/10/22 04:12:58
0 2020/10/22 04:13:12
0 2020/10/22 04:13:31
0 2020/10/23 04:03:19
0 2020/10/23 04:04:45
Water jet cut plates from first production
Water jet cut plates from first production
0 2020/10/23 04:11:44
Formed and painted plate bottom.
Formed and painted plate bottom.
0 2020/10/23 04:11:56
Formed and painted plate top.
Formed and painted plate top.
0 2020/10/23 04:12:08
Frame cut into four sections. From left to right the front section is usable. The second section with the manual transmission cross member is usable. The kickup area is not usable, rotten. The rear section is usable.
Frame cut into four sections. From left to right the front section is usable. The second section with the manual transmission cross member is usable. The kickup area is not usable, rotten. The rear section is usable.
0 2020/10/23 08:17:26
Section picture of the frame dissected.
Section picture of the frame dissected.
0 2020/10/23 08:17:43