CorvetteForum - Chevrolet Corvette Forum Discussion
There was even body filler in here hiding this surprise!
There was even body filler in here hiding this surprise!
0 2019/08/17 07:01:21
Rust flakes & hole by VIN plate
Rust flakes & hole by VIN plate
0 2019/08/18 05:59:29
Second external clue: dark shadow on frame. Rope seal obviously still attached to w/s. But later probing revealed it was not attached to w/s frame.
Second external clue: dark shadow on frame. Rope seal obviously still attached to w/s. But later probing revealed it was not attached to w/s frame.
0 2019/08/18 06:01:24
Third external clue: Looked good to me. Later I realized I could feel loose rust if I stuck my pinky in the gap there.
Third external clue: Looked good to me. Later I realized I could feel loose rust if I stuck my pinky in the gap there.
0 2019/08/18 06:06:23
0 2019/08/18 06:08:05
Internal: More clues behind driver's internal kick panel. Surface rust. But about 1/3 of small baby jar of loose rust flakes from somewhere..... five inch rust slot above.
Internal: More clues behind driver's internal kick panel. Surface rust. But about 1/3 of small baby jar of loose rust flakes from somewhere..... five inch rust slot above.
0 2019/08/18 06:08:50
Driver's header once inner trim removed.
Driver's header once inner trim removed.
0 2019/08/18 06:10:36
Pass kick panel still had paint and primer showing, but was resprayed black not factory green. Little rust. Who would have guessed a 5 inch rust slot directly above?
Pass kick panel still had paint and primer showing, but was resprayed black not factory green. Little rust. Who would have guessed a 5 inch rust slot directly above?
0 2019/08/18 06:11:25
0 2019/08/24 15:59:16
0 2019/08/24 16:00:32
0 2019/08/24 16:00:42
0 2019/08/24 17:08:36
0 2019/08/24 17:09:04
0 2019/08/24 17:09:34
0 2019/08/24 17:10:11
0 2019/08/24 17:10:41
0 2019/08/24 17:11:06
0 2019/08/24 17:11:48
0 2019/08/24 17:12:03
0 2019/08/24 17:12:21
0 2019/08/24 17:19:14
0 2019/08/28 07:36:30
Significant chamber wall backcutting near valves
Significant chamber wall backcutting near valves
0 2019/08/28 07:36:59
Stock 074 chamber backcuts unmodified
Stock 074 chamber backcuts unmodified
0 2019/08/28 07:44:47
0 2019/08/28 10:36:39
0 2019/08/28 10:46:20
0 2019/08/28 10:46:31
0 2019/08/28 10:46:37
0 2019/08/28 10:50:57
This entire area is about 1-1/2 inches high and was resting on the pan baffle initially. That's the area where the baffle had to be trimmed.
This entire area is about 1-1/2 inches high and was resting on the pan baffle initially. That's the area where the baffle had to be trimmed.
0 2019/08/30 07:37:26
0 2019/08/30 07:43:12
Eastwood was backordered on their 2 part primer for a month, and suggested this VHT 2000 degree primer as a substitute.
Eastwood was backordered on their 2 part primer for a month, and suggested this VHT 2000 degree primer as a substitute.
0 2019/08/30 07:43:46
0 2019/08/30 07:44:12
0 2019/08/30 07:44:42
1 can of color was just enough for 2 light coats, since it was a short block only.
1 can of color was just enough for 2 light coats, since it was a short block only.
0 2019/08/30 07:45:20
0 2019/08/30 07:51:46
0 2019/08/30 08:00:48
0 2019/08/30 08:02:19
0 2019/08/30 08:06:01
0 2019/08/30 08:06:44