CorvetteForum - Chevrolet Corvette Forum Discussion
0 2026/06/02 19:26:20
Still looks good.
Still looks good.
0 2026/06/02 19:13:21
I used Por 15 high temp spray paint 10+ years and many 1000's of miles ago. Still looks nice. Sand blast your manifolds to remove paint. Spray on one heavy coat, let dry. Then cure in your oven at 400F for 2 hours ( when your wife is not home ) as per instructions on the tin.
I used Por 15 high temp spray paint 10+ years and many 1000's of miles ago. Still looks nice. Sand blast your manifolds to remove paint. Spray on one heavy coat, let dry. Then cure in your oven at 400F for 2 hours ( when your wife is not home ) as per instructions on the tin.
0 2026/06/02 19:13:08
How could I black out white lettering on new tires? I was thinking a black magic marker or maybe black shoe polish.
How could I black out white lettering on new tires? I was thinking a black magic marker or maybe black shoe polish.
0 2026/06/02 17:17:39
How could I black out white lettering? I wad thinking maybe a black madjic matker
How could I black out white lettering? I wad thinking maybe a black madjic matker
0 2026/06/02 17:13:17
0 2026/05/25 12:52:20
0 2026/05/25 12:50:49
0 2026/05/25 12:45:36
This is on my '65. Front hub still has rotor riveted to the hub.
This is on my '65. Front hub still has rotor riveted to the hub.
0 2026/05/25 12:45:32
0 2026/05/25 04:23:40
0 2026/05/25 04:23:34
0 2026/05/17 13:15:39
0 2026/05/17 13:15:33
0 2026/05/17 13:15:27
0 2026/05/15 07:23:14
0 2026/05/15 07:23:07
0 2026/05/07 08:03:36
'65 coupe frame. -10 stamped in front of both rear wheels. Why would this number be stamped into the frame? Some thing to do with factory body shims maybe?
'65 coupe frame. -10 stamped in front of both rear wheels. Why would this number be stamped into the frame? Some thing to do with factory body shims maybe?
0 2026/05/07 08:03:30
0 2026/05/06 04:41:12
0 2026/05/05 17:08:50
0 2026/05/05 17:08:35
0 2026/04/29 08:08:44
All new parts, still needs tires and alignment. But the outside edge of the tire is wearing.
All new parts, still needs tires and alignment. But the outside edge of the tire is wearing.
0 2026/04/29 07:59:48
0 2026/04/14 08:20:01
0 2026/04/14 08:19:54
0 2026/04/14 08:19:46
0 2026/04/14 08:19:36
0 2026/04/14 08:19:30
0 2026/04/14 08:09:01
0 2026/04/14 08:08:49
0 2026/04/14 08:08:38
0 2026/04/14 08:08:27
I ordered a Left rear ( driver's side caliper ). I got this casting # 5473806 which is a Right side casting #. It is set up for the Left driver's side, with the brake line in the correct postion. Looks like it would bolt on. Will this funtion correctly?
I ordered a Left rear ( driver's side caliper ). I got this casting # 5473806 which is a Right side casting #. It is set up for the Left driver's side, with the brake line in the correct postion. Looks like it would bolt on. Will this funtion correctly?
0 2026/04/14 08:08:15
0 2026/04/11 15:24:53
- Is this window crank clip on in the correct direction? - Door lock knob clip direction?
- Is this window crank clip on in the correct direction? - Door lock knob clip direction?
0 2026/04/02 11:28:08
0 2026/03/12 07:25:46
Early '65 door panel. The 2 tabs close together go to the top. The single tab goes the bottom.
Early '65 door panel. The 2 tabs close together go to the top. The single tab goes the bottom.
0 2026/03/12 07:19:39
0 2026/03/12 07:19:26
0 2026/03/12 07:19:06
0 2026/02/18 16:21:39